# Additive manufacturing (3D printing): Materials

Source page: https://www.materialinsights.org/technologies/additive_manufacturing/tech-materials/

#### Materials it needs

The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
 Uses

- [EPX Epoxy resins](https://www.materialinsights.org/chemicals/epoxy/) criticality low Light-curing resins for stereolithography are acrylate and epoxy based.
 Processes 6

- [PA Nylon (PA6, PA66)](https://www.materialinsights.org/chemicals/nylon/) criticality low Nylon powder is the usual material for laser sintering of plastic parts.
- [PLA Lactic acid and PLA](https://www.materialinsights.org/chemicals/lactic_acid_pla/) criticality low PLA filament is the common material of desktop printers.
- [Ti Titanium](https://www.materialinsights.org/commodities/titanium/) criticality high Titanium alloy powder is printed into implants and aircraft parts; titanium metal is on the EU critical and strategic lists ^[9].
- [Ni Nickel](https://www.materialinsights.org/commodities/nickel/) criticality medium Nickel superalloy powders are printed into engine parts; battery-grade nickel is on the EU lists ^[9].
- [Al Aluminium](https://www.materialinsights.org/commodities/aluminum/) criticality medium Aluminium alloy powders are printed for light parts; aluminium is on the EU critical and strategic lists ^[9].
- [St Steel](https://www.materialinsights.org/commodities/steel/) criticality low Stainless and tool steel powders are printed into tooling and parts.

as of 2026-11-11. No source opened gives amounts per part; materials were about 20% of the industry's revenue in 2024 [5]. Criticality is the writer's judgement from the EU lists.

#### Critical materials

The materials whose supply could hold it back

- Titanium metal: on both the EU critical and strategic raw material lists ^[9], and printed into implants and aircraft parts.
- Aluminium: bauxite, alumina and aluminium are on both EU lists ^[9].
- No plastic used in printing is on a critical list; their supply follows the wider plastics market.

as of 2026-11-11

#### Sources

1. [RMIS - Critical and Strategic Materials](https://rmis.jrc.ec.europa.eu/critical-and-strategic-materials) European Commission, Joint Research Centre, Raw Materials Information System

## Other sections

- [Summary](https://www.materialinsights.org/technologies/additive_manufacturing/index.md)
- [Overview](https://www.materialinsights.org/technologies/additive_manufacturing/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/additive_manufacturing/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/additive_manufacturing/tech-evolution/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/additive_manufacturing/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/additive_manufacturing/tech-industries/index.md)
