# Additive manufacturing (3D printing): Science

Source page: https://www.materialinsights.org/technologies/additive_manufacturing/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Macromolecules (polymer theory)](https://www.materialinsights.org/science/polymer_macromolecules/) Light-curing resins and printing plastics depend on small molecules linking into long chains, which turns liquid into solid ^[1, 8].
- [Stimulated emission](https://www.materialinsights.org/science/stimulated_emission/) Stereolithography and powder-bed machines use lasers, light amplified by stimulated emission, to cure or melt each layer precisely ^[1].
 Limited by

- [Heat conduction (Fourier's law)](https://www.materialinsights.org/science/heat_conduction/) In powder melting, heat must flow away from each melted track before the next, which limits build speed and causes stresses in the part.

as of 2026-11-11

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1917 | Albert Einstein | Predicted stimulated emission, the principle of the laser ^[6] |
| 1922 | Hermann Staudinger and J. Fritschi | Proposed that polymers are giant molecules, the basis of plastics chemistry ^[8] |
| 1958 | Arthur Schawlow and Charles Townes | Set out the principle of the optical maser, the laser, in Physical Review ^[7] |

as of 2026-11-11

#### The science explained

The science behind it explained for a curious reader

Imagine building a loaf of bread by stacking its slices. Each slice is thin and flat, easy to cut to any outline, and together they make any shape, even one with tunnels inside. A 3D printer works the same way. In stereolithography, a liquid resin is made of small molecules that link into long chains when ultraviolet light strikes them, turning liquid into solid ^[1]. A laser, a beam of light made by stimulated emission, which Einstein predicted in 1917 ^[6], draws one slice on the resin surface. The part moves down a fraction of a millimetre and the next slice is drawn on top, bonding to the one below.

as of 2026-11-11

#### Sources

1. [Stereolithography: The First 3D Printing Technology (ASME landmark 261)](https://www.asme.org/wwwasmeorg/media/ResourceFiles/AboutASME/Who We Are/Engineering History/Landmarks/261-Stereolithography.pdf) American Society of Mechanical Engineers, 2016
2. [Einstein predicts stimulated emission](https://www.aps.org/apsnews/2005/08/einstein-predicts-stimulated-emission) APS News, American Physical Society, 2005
3. [This Month in Physics History: December 1958](https://www.aps.org/apsnews/2003/12/this-month-in-physics-history) American Physical Society, APS News, 2003
4. [Hermann Staudinger](https://www.britannica.com/print/article/564304) Encyclopaedia Britannica

## Other sections

- [Summary](https://www.materialinsights.org/technologies/additive_manufacturing/index.md)
- [Overview](https://www.materialinsights.org/technologies/additive_manufacturing/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/additive_manufacturing/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/additive_manufacturing/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/additive_manufacturing/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/additive_manufacturing/tech-industries/index.md)
