# Anti-lock braking: Materials

Source page: https://www.materialinsights.org/technologies/anti_lock_braking/tech-materials/

#### Materials it needs

The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
 Needs 4

- [Al Aluminium](https://www.materialinsights.org/commodities/aluminum/) criticality low The hydraulic block that holds the valves is commonly made of aluminium.
- [Cu Copper](https://www.materialinsights.org/commodities/copper/) criticality medium Copper wire forms the coils of the solenoid valves, the pump motor and the wheel-sensor wiring.
- [Si Silicon](https://www.materialinsights.org/commodities/silicon/) criticality medium The control unit is built on silicon microchips; chip shortages have held up car production.
- [St Steel](https://www.materialinsights.org/commodities/steel/) criticality low The toothed sensor rings and many valve parts are steel.

as of 2026-11-11. No source opened gives material amounts per ABS unit; criticality is the writer's judgement.

#### Critical materials

The materials whose supply could hold it back

- Microchips: the control unit needs automotive-grade chips, whose supply depends on a small number of chipmakers.
- Copper: needed for valve coils, the pump motor and wiring, so ABS shares in any squeeze on copper supply.

as of 2026-11-11

## Other sections

- [Summary](https://www.materialinsights.org/technologies/anti_lock_braking/index.md)
- [Overview](https://www.materialinsights.org/technologies/anti_lock_braking/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/anti_lock_braking/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/anti_lock_braking/tech-evolution/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/anti_lock_braking/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/anti_lock_braking/tech-industries/index.md)
