# Aseptic packaging (UHT): Energy footprint

Source page: https://www.materialinsights.org/technologies/aseptic_processing/tech-energy-footprint/

#### Energy in use

The energy it uses or converts while it works, and how efficiently

**Consumption**
: Steam or hot water for heating and electricity for pumps, cooling and packing machines

**Conversion**
: Heats the product above 135 °C for seconds, then cools it again

**Note**
: Direct heating uses steam contact and vacuum flash-cooling; indirect heating uses heat exchangers ^[1]. Aseptic packs then need no refrigeration in storage ^[1].

as of 2026-11-11

#### Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back
 Consumes

- [Ht Heat](https://www.materialinsights.org/energy/heat/) Steam injection or infusion, or heat exchangers, raise the product above 135 °C ^[1].
- [El Electricity](https://www.materialinsights.org/energy/electricity/) Continuous-flow UHT plants pump the product through heaters, coolers and sterile filling lines ^[1].

as of 2026-11-11

#### Sources

1. [Dairy Science and Technology eBook, 22. UHT Treatment](https://books.lib.uoguelph.ca/dairyscienceandtechnologyebook/chapter/uht-treatment/) University of Guelph (H. Douglas Goff, Arthur Hill and Mary Ann Ferrer)

## Other sections

- [Summary](https://www.materialinsights.org/technologies/aseptic_processing/index.md)
- [Overview](https://www.materialinsights.org/technologies/aseptic_processing/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/aseptic_processing/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/aseptic_processing/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/aseptic_processing/tech-materials/index.md)
- [Industries](https://www.materialinsights.org/technologies/aseptic_processing/tech-industries/index.md)
