# Atomic layer deposition: Energy footprint

Source page: https://www.materialinsights.org/technologies/atomic_layer_deposition/tech-energy-footprint/

#### Energy in use

The energy it uses or converts while it works, and how efficiently

**Consumption**
: Electricity to heat the chamber above room temperature ^[2], and to run pumps and valves

**Conversion**
: Chemical energy of the reactants is released in surface reactions that build the film

**Note**
: No source opened gives energy per wafer or per cycle.

as of 2026-11-11

#### Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back
 Consumes

- [El Electricity](https://www.materialinsights.org/energy/electricity/) The reaction temperature is typically raised above room temperature ^[2], with electric heating, pumps and valves.

as of 2026-11-11

#### Sources

1. [ALD: Brief introduction to ALD](https://openlearning.aalto.fi/mod/page/view.php?id=7632) Aalto University, Aalto OpenLearning

## Other sections

- [Summary](https://www.materialinsights.org/technologies/atomic_layer_deposition/index.md)
- [Overview](https://www.materialinsights.org/technologies/atomic_layer_deposition/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/atomic_layer_deposition/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/atomic_layer_deposition/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/atomic_layer_deposition/tech-materials/index.md)
- [Industries](https://www.materialinsights.org/technologies/atomic_layer_deposition/tech-industries/index.md)
