# Basic oxygen steelmaking: Evolution

Source page: https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-evolution/

#### Timeline

The milestones from first idea to today

| Year | Milestone |
|---|---|
| 1947 | Pilot-plant tests of oxygen refining at the Von Roll works in Gerlafingen, Switzerland, after Durrer's laboratory work of 1940 to 1943 ^[4] |
| 1949 | Trials of top-blowing liquid iron with oxygen begin at the Linz steelworks on 3 June ^[1] |
| 1952 | The first 30-tonne LD converter starts up in Linz in November ^[1]^[5] |
| 1953 | A second LD plant starts at Donawitz, Austria, on 22 May ^[1] |
| 1956 | An order for LD converters for Rourkela in India takes the process abroad ^[1] |
| 2025 | Oxygen converters make 69.4% of world crude steel ^[2] |

as of 2026-11-11

#### Lineage

The technologies it came from and the ones that came from it
 Came before it

- [Bes Bessemer process](https://www.materialinsights.org/technologies/bessemer_process/) The first Linz trials in 1949 used a rebuilt Bessemer converter, and the LD process blows oxygen where Bessemer blew air ^[1].
- [OH Open-hearth steelmaking](https://www.materialinsights.org/technologies/open_hearth_steelmaking/) The basic oxygen furnace replaced the open hearth, which needed 10 to 12 hours a heat against under 40 minutes ^[1]^[6].
 Works with

- [BF Blast furnace and cast iron](https://www.materialinsights.org/technologies/blast_furnace/) The converter is charged with molten pig iron straight from the blast furnace.
 Can replace

- [EAF Electric arc furnace](https://www.materialinsights.org/technologies/electric_arc_furnace/) The electric furnace competes with the converter for the same job: in 2025 converters made 69.4% of world crude steel and electric furnaces 30.3% ^[2].
- [H2D Hydrogen direct reduction (green steel)](https://www.materialinsights.org/technologies/hydrogen_dri/) Iron reduced with hydrogen instead of coke can feed electric furnaces, a route meant to replace the coal-based blast furnace and converter.

as of 2026-11-11

#### Sources

1. [The History of LD Steelmaking: Back to the Roots](https://www.primetals.com/en/metals-magazine/the-history-of-ld-steelmaking-back-to-the-roots/) Primetals Technologies, Metals Magazine, 2016
2. [World Steel in Figures 2026](https://worldsteel.org/data/world-steel-in-figures/world-steel-in-figures-2026/) World Steel Association, 2026
3. [Beitrag zur geschichtlichen Entwicklung des Sauerstoffaufblas-Stahlerzeugungs-Verfahrens](https://www.chimia.ch/chimia/article/view/1975_510) CHIMIA 29, p. 510 (Borut Marincek), 1975
4. [60 years of the Linz-Donawitz (LD) process](https://www.voestalpine.com/stahl/en/Stories/60-years-of-the-Linz-Donawitz-LD-process) voestalpine Steel Division
5. [Bessemer's Steel Processing Method](https://www.ebsco.com/research-starters/history/bessemers-steel-processing-method) EBSCO Research Starters (Gary A. Campbell), 2023

## Other sections

- [Summary](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/index.md)
- [Overview](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-science/index.md)
- [Materials](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-industries/index.md)
