# Basic oxygen steelmaking: Overview

Source page: https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

Basic oxygen steelmaking turns molten pig iron from the blast furnace into steel by burning out its excess carbon with pure oxygen. It started at Linz, Austria, in 1952 ^[1] and replaced the open-hearth furnace ^[6]. In 2025 it made 69.4% of the world's 1,849 million tonnes of crude steel ^[2], so most cars, ships, rails and beams start in an oxygen converter.

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

Molten pig iron holds several per cent of carbon, plus silicon and phosphorus, which make it brittle. It is poured into a pear-shaped converter lined with heat-resistant brick, together with some steel scrap. A water-cooled lance is lowered and blows a jet of pure oxygen at high speed onto the surface. The oxygen burns the carbon to carbon monoxide gas and turns silicon and phosphorus into oxides. Lime added to the charge melts into a slag that holds those oxides. The burning releases so much heat that no fuel is needed, and the scrap soaks up the surplus. When the carbon is low enough the converter tilts, the steel is tapped into a ladle and the slag is poured off. A heat takes less than 40 minutes ^[1].

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Share of world crude steel made in oxygen converters | 69.4 | % | 2025 | ^[2] |
| World crude steel production, all routes | 1849 | million tonnes | 2025 | ^[2] |
| Time to turn molten iron into crude steel | 40 | minutes (less than) | 2016 | ^[1] |
| Largest converter capacities built | 400 | tonnes (more than) | 2016 | ^[1] |
| Scrap share a converter can take | 30 | % (about) | 2018 | ^[3] |

as of 2026-11-11. The years of the converter time, converter size and scrap share rows are the publication years of their sources (2016 and 2018), not data years; the sources give no data year.

#### Where it is used

The main places and products the technology is found in

- Integrated steelworks, where converters stand next to blast furnaces
- Flat steel for car bodies, appliances and cans
- Plate and sections for ships, bridges and buildings
- Rails, pipes and wire rod

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Made per year**
: About 1,280 million tonnes of crude steel (calculated: 69.4% of 1,848.9 million tonnes) ^[2]

**Unit**
: tonnes of crude steel

**Year**
: 2025

**Note**
: Counts steel made in oxygen-blown converters, from the worldsteel table of production by process.

as of 2026-11-11

#### Sources

1. [The History of LD Steelmaking: Back to the Roots](https://www.primetals.com/en/metals-magazine/the-history-of-ld-steelmaking-back-to-the-roots/) Primetals Technologies, Metals Magazine, 2016
2. [World Steel in Figures 2026](https://worldsteel.org/data/world-steel-in-figures/world-steel-in-figures-2026/) World Steel Association, 2026
3. [Fact sheet: Steel and raw materials](https://steel.org.au/getattachment/458fa31b-2586-47bb-a645-9411140863dd/WSA_fact_raw_materials_2018.pdf) World Steel Association (copy hosted by Australian Steel Institute), 2018
4. [Bessemer's Steel Processing Method](https://www.ebsco.com/research-starters/history/bessemers-steel-processing-method) EBSCO Research Starters (Gary A. Campbell), 2023

## Other sections

- [Summary](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/index.md)
- [Science](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-industries/index.md)
