# Basic oxygen steelmaking: Science

Source page: https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Combustion chemistry](https://www.materialinsights.org/science/combustion_chemistry/) Oxygen burns the carbon dissolved in the iron to carbon monoxide, and that burning supplies the heat of the process.
- [Thermodynamics of ore reduction (Ellingham diagram)](https://www.materialinsights.org/science/reduction_thermodynamics/) Silicon, carbon and phosphorus bind to oxygen more readily than iron does, so they are removed while most of the iron stays as metal.
- [Joule-Thomson effect](https://www.materialinsights.org/science/joule_thomson_effect/) The cheap tonnage oxygen the process needs comes from air liquefied by compressing it and letting it expand, the method Linde used in 1895 ^[7].
 Limited by

- [Chemical equilibrium (Le Chatelier's principle)](https://www.materialinsights.org/science/chemical_equilibrium/) How much phosphorus and oxygen stay in the steel is set by the balance between metal and slag, which is why lime is added and the steel is deoxidised after tapping.

as of 2026-11-11

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1878 | Sidney Gilchrist Thomas and Percy Gilchrist | A basic lining and lime remove phosphorus, so phosphorus-rich ores can be used ^[6] |
| 1895 | Carl von Linde | Liquefied air by compressing it and letting it expand ^[7] |
| 1902 | Carl von Linde | Separated oxygen from liquefied air, the basis of tonnage oxygen ^[7] |

as of 2026-11-11

#### The science explained

The science behind it explained for a curious reader

Picture molten pig iron as a soup with fuel stirred into it: several per cent of carbon and some silicon. Blowing pure oxygen onto it is like turning a blowtorch on that fuel. The oxygen grabs silicon and carbon before iron, because they bind to it more eagerly. The carbon leaves as carbon monoxide gas, which makes the bath boil. The silicon and phosphorus become oxides that float up into a layer of molten lime, the slag, which is chemically basic and holds them, the trick Thomas and Gilchrist found in 1878 ^[6]. All this burning gives off more heat than the bath needs, so cold scrap is thrown in to soak it up. Using pure oxygen rather than air means no nitrogen is blown through, so the steel stays cleaner than Bessemer steel.

as of 2026-11-11

#### Sources

1. [Bessemer's Steel Processing Method](https://www.ebsco.com/research-starters/history/bessemers-steel-processing-method) EBSCO Research Starters (Gary A. Campbell), 2023
2. [Carl von Linde](https://sciencehistory.org/education/scientific-biographies/carl-von-linde/) Science History Institute

## Other sections

- [Summary](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/index.md)
- [Overview](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/basic_oxygen_steelmaking/tech-industries/index.md)
