# Bessemer process: Science

Source page: https://www.materialinsights.org/technologies/bessemer_process/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Combustion chemistry](https://www.materialinsights.org/science/combustion_chemistry/) The oxygen in the blast burns carbon and silicon dissolved in the iron, and the heat of that burning keeps the charge molten ^[1].
- [Thermodynamics of ore reduction (Ellingham diagram)](https://www.materialinsights.org/science/reduction_thermodynamics/) Carbon and silicon take oxygen more readily than iron does, so they burn out first and most of the iron is spared.
 Limited by

- [Chemical equilibrium (Le Chatelier's principle)](https://www.materialinsights.org/science/chemical_equilibrium/) Oxygen dissolved in the steel at the end of the blow must be removed with manganese, or the steel is brittle ^[1]^[2].

as of 2026-11-10

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1777 | Antoine Lavoisier | Combustion explained as reaction with oxygen, replacing the phlogiston theory ^[4] |
| 1863 | Henry Clifton Sorby | Began polishing and etching iron and steel to study their structure under the microscope ^[3] |
| 1878 | Sidney Gilchrist Thomas and Percy Gilchrist | Showed that a basic lining of dolomite or limestone lets phosphorus-rich iron be used ^[1]^[2] |

as of 2026-11-10

#### The science explained

The science behind it explained for a curious reader

Pig iron is iron with fuel dissolved in it: several per cent of carbon and some silicon. Blowing air through it is like fanning a fire, except that the fuel is spread through the metal itself. The oxygen seeks out silicon and carbon first, because they bind to oxygen more eagerly than iron does. Their burning gives off so much heat that the melt gets hotter, not colder ^[1]. Carbon leaves as gas, which makes the converter roar and throw out sparks. What remains is iron with little carbon. But steel needs a small, exact amount of carbon to be strong, which is why makers add carbon back at the end ^[1]. From 1863 Sorby's etched specimens let metallurgists see that structure under the microscope ^[3].

as of 2026-11-10

#### Sources

1. [Wikipedia: Bessemer process](https://en.wikipedia.org/wiki/Bessemer_process)
2. [Bessemer's Steel Processing Method](https://www.ebsco.com/research-starters/history/bessemers-steel-processing-method) EBSCO Research Starters (Gary A. Campbell), 2023
3. [The metallurgical work of Henry Clifton Sorby and an annotated catalogue of his extant metallurgical specimens](https://www.hmsjournal.org/index.php/home/article/download/317/306/306) Journal of the Historical Metallurgy Society 31(2), pp. 54-85 (Edyvean and Hammond), 1997
4. [The Chemical Revolution: Antoine-Laurent Lavoisier (International Historic Chemical Landmark booklet)](https://inchemistry.acs.org/content/dam/acsorg/education/whatischemistry/landmarks/lavoisier/antoine-laurent-lavoisier-commemorative-booklet.pdf) American Chemical Society, 1999

## Other sections

- [Summary](https://www.materialinsights.org/technologies/bessemer_process/index.md)
- [Overview](https://www.materialinsights.org/technologies/bessemer_process/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/bessemer_process/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/bessemer_process/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/bessemer_process/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/bessemer_process/tech-industries/index.md)
