# Cemented carbide: Overview

Source page: https://www.materialinsights.org/technologies/cemented_carbide/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

Cemented carbide, or hardmetal, holds fine grains of tungsten carbide in a metal binder, usually cobalt ^[1]^[2]. Karl Schröter of Osram filed the first patent in 1923, and the material was shown as a tool material in 1927 ^[1]. It lets machines cut steel almost four times faster than high-speed steel tools ^[1], and it takes about 60% of the tungsten used in the United States ^[4].

as of 2026-11-12

#### How it works

The working principle in plain words, step by step

Tungsten carbide is a ceramic: its grains are very hard but brittle, so a tool made of it alone would shatter ^[2]. Cobalt is a metal that can bend a little before it breaks ^[2]. Mixing fine carbide powder with cobalt powder, pressing it into shape and heating it combines the two ^[3]. The heating, called sintering, is done just above the temperature at which part of the mixture turns liquid ^[3]. The liquid binder fills the gaps between the grains, and the part must end up fully dense ^[3]. On cooling, a skeleton of hard grains is cemented in a tough metal matrix: the grains do the cutting and the binder lets the material take damage without breaking ^[2].

as of 2026-11-12

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Share of US tungsten consumption used in cemented carbide parts | 60 | % | 2026 | ^[4] |
| Share of US cobalt consumption used in cemented carbides | 9 | % | 2025 | ^[5] |
| Share of world tungsten output used to make tungsten carbide | 55 | % | 1997 | ^[8] |
| Typical cobalt binder content, upper end of range | 18 | wt% | 2020 | ^[3] |
| Steel cutting speed made possible by carbide tools | 150 | m/min | 2023 | ^[1] |
| World tungsten mine production | 85 | thousand t | 2025 | ^[4] |

as of 2026-11-12. The US tungsten share is from the USGS 2026 summary, which gives no data year, so the publication year is shown; the cobalt share is a 2025 estimate [4][5]. The world tungsten share is from a 1997 paper, its publication year [8]. The binder range is 6 to 18 wt% cobalt, or 10 to 30% by volume, and 2020 is the article's publication year [3]. The cutting speed describes the carbide tools of the 1920s; 2023 is the article's publication year, not the data year [1].

#### Where it is used

The main places and products the technology is found in

- Cutting, machining and forming tools ^[2]
- Metalworking inserts and drills ^[1]^[4]
- Mining, construction and oil and gas drilling bits ^[4]

as of 2026-11-12

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Made per year**
: No source gives world hardmetal output; about 60% of US tungsten use goes into cemented carbide parts ^[4]

**Unit**
: t of tungsten

**Year**
: 2025

**Note**
: World tungsten mining was about 85 thousand t in 2025 ^[4], most of it bound for carbides.

Indicative · as of 2026-11-12

#### Sources

1. [Celebrating a century of cemented carbide use in tooling](https://ctemag.com/news/celebrating-century-cemented-carbide-use-tooling/) Cutting Tool Engineering (news item on Sandvik Coromant), 2023
2. [Nanomechanical behaviour of individual phases in WC-Co cemented carbides, from ambient to high temperature (De Luca and others)](https://strathprints.strath.ac.uk/73784/1/DeLuca_etal_Materialia_2020_Nanomechanical_behaviour_of_individual_phases_in_WC_Co_cemented_carbides.pdf) University of Strathclyde (Strathprints, author's copy)
3. [Additive Manufacturing of hardmetals: An evaluation of potential processes for tool production (Johannes Pötschke)](https://www.metal-am.com/?p=78539) Metal AM magazine, Vol. 6 No. 3, 2020
4. [Tungsten, Mineral Commodity Summaries 2026](https://pubs.usgs.gov/periodicals/mcs2026/mcs2026-tungsten.pdf) U.S. Geological Survey, 2026
5. [Mineral Commodity Summaries 2026: Cobalt](https://pubs.usgs.gov/periodicals/mcs2026/mcs2026-cobalt.pdf) US Geological Survey, 2026
6. [1996: Centenaire de la découverte du carbure de tungstène par Henri Moissan; historique du développement de ce matériau (H. Pastor)](https://www.metallurgical-research.org/10.1051/metal/199794121537) Revue de Métallurgie, vol. 94, no. 12, EDP Sciences, 1997

## Other sections

- [Summary](https://www.materialinsights.org/technologies/cemented_carbide/index.md)
- [Science](https://www.materialinsights.org/technologies/cemented_carbide/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/cemented_carbide/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/cemented_carbide/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/cemented_carbide/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/cemented_carbide/tech-industries/index.md)
