# Numerical control machining: Overview

Source page: https://www.materialinsights.org/technologies/cnc_machining/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

Numerical control steers a machine tool by numbers instead of a machinist's hands: a program sets where each axis moves and how fast ^[1]. It cuts complex shapes accurately and repeats them exactly. The first numerically controlled machine tool was shown at MIT in 1952 ^[1]; commercial machines followed in 1955 ^[3], and built-in computers made it CNC in the 1970s ^[3].

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

A part is first described as geometry: points, lines, arcs and surfaces. Software, or in early days a language such as APT ^[1], turns that shape into a list of moves for each axis, with speeds and tool changes. The controller reads the list one step at a time. For each axis it sends a command to a motor that turns a screw and moves the table or spindle. A sensor measures where the axis actually is, and the controller corrects any difference at once. This loop of command, measure and correct runs many times a second on every axis together, so the tool follows a smooth path through the metal. Changing the part means loading a new program, not rebuilding the machine.

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Numerically controlled share of Japan's machine tool production, by value | 93.5 | % | 2024 | ^[9] |
| Value of Japan's numerically controlled machine tool production | 843.1 | billion JPY | 2024 | ^[9] |
| China's share of world machine tool production | 37 | % | 2025 | ^[5] |
| Value of China's machine tool production | 30 | billion EUR | 2025 | ^[5] |

as of 2026-11-11. JMTBA's NC ratio is the value of numerically controlled machines as a share of all machine tools Japan made in 2024 [9]. The VDW shares are of world machine tool production; the release on 2025 output does not say whether by value or units, and the share sentence itself states no year [5].

#### Where it is used

The main places and products the technology is found in

- Machining centres and lathes in engineering workshops
- Engine, gearbox and body parts for cars
- Aircraft structures and turbine parts
- Moulds and dies for plastics and metal forming
- Laser, plasma and water-jet cutters and routers

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Made per year**
: Japan made numerically controlled machine tools worth 843.1 billion yen, 93.5% of its machine tool output by value ^[9]

**Unit**
: JPY of numerically controlled machine tools

**Year**
: 2024

**Note**
: No world count of numerically controlled machines was found; China, the largest producer, made machine tools worth about 30 billion euros in 2025, 37% of world production ^[5].

as of 2026-11-11

#### Sources

1. [Automation: Development of robotics](https://www.britannica.com/technology/automation/Development-of-robotics) Encyclopaedia Britannica
2. [60 years of challenge and change](https://www.americanmachinist.com/features/60-years-challenge-and-change) American Machinist, 1998
3. [German machine tool industry leveling off: China further dominating production](https://vdw.de/wp-content/uploads/2026/03/pr_ae_q4_2025_2026-03-18_en.pdf) VDW (German Machine Tool Builders' Association), press release, 2026
4. [Machine Tool Industry Japan 2025](https://www.jmtba.or.jp/english/wjmtbap/wp-content/uploads/2025/09/MachineTool-Production.pdf) Japan Machine Tool Builders' Association, 2025

## Other sections

- [Summary](https://www.materialinsights.org/technologies/cnc_machining/index.md)
- [Science](https://www.materialinsights.org/technologies/cnc_machining/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/cnc_machining/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/cnc_machining/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/cnc_machining/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/cnc_machining/tech-industries/index.md)
