# Numerical control machining: Science

Source page: https://www.materialinsights.org/technologies/cnc_machining/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Feedback control theory](https://www.materialinsights.org/science/feedback_control/) Each axis is a servomechanism: the controller compares the commanded position with the measured one and drives the motor to close the gap.
- [Euclidean geometry](https://www.materialinsights.org/science/euclidean_geometry/) Tool paths are built from points, lines, arcs and surfaces in a coordinate frame, which is what the program describes.

as of 2026-11-11

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1868 | James Clerk Maxwell | First mathematical analysis of a feedback governor ^[6] |
| 1932 | Harry Nyquist | Stability criterion for feedback systems ^[6] |
| 1934 | Harold Hazen | Summary of servomechanism theory, the basis of position control ^[6] |

as of 2026-11-11

#### The science explained

The science behind it explained for a curious reader

Think of steering a car along a painted line. You look where the car is, compare it with the line and turn the wheel to correct, again and again. A numerically controlled axis does the same, only faster and with numbers. The program says where the tool should be at each instant. A sensor reports where it is. The difference drives the motor, and as the gap closes the push eases. Maxwell first analysed such loops in 1868 ^[6], and later engineers learned how to keep them from overshooting and oscillating ^[6]. Run three or five such loops together and the tool can trace any curve in space.

as of 2026-11-11

#### Sources

1. [A History of Automatic Control](https://www.control.lth.se/fileadmin/control/Education/DoctorateProgram/HistoryOfControl/2016/Bissell_history_of_automatic_control.pdf) C. C. Bissell (chapter in a Springer handbook, ISBN 978-3-540-78830-0; Lund University course copy)

## Other sections

- [Summary](https://www.materialinsights.org/technologies/cnc_machining/index.md)
- [Overview](https://www.materialinsights.org/technologies/cnc_machining/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/cnc_machining/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/cnc_machining/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/cnc_machining/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/cnc_machining/tech-industries/index.md)
