# 3D-printed construction: Materials

Source page: https://www.materialinsights.org/technologies/concrete_3d_printing/tech-materials/

#### Materials it needs

The commodities and chemicals it needs per unit, its share of each one's demand and how critical each is
 Needs

- [Cem Cement](https://www.materialinsights.org/commodities/cement/) criticality low Cement is the binder of print mortars, which are rich in it because they use only fine aggregate.
- [Agg Sand & gravel](https://www.materialinsights.org/commodities/sand_gravel/) criticality low Fine sand makes up most of a print mortar; coarse gravel would block the nozzle.
- [St Steel](https://www.materialinsights.org/commodities/steel/) criticality low Reinforcing bars or mesh are added during or after printing to carry tension.
 Uses

- [Con Construction chemicals](https://www.materialinsights.org/chemicals/construction_chemicals/) criticality low Admixtures control flow, how fast each layer stiffens, and how layers bond.
 Recovers

- [Stn Crushed stone](https://www.materialinsights.org/commodities/crushed_stone/) criticality low WinSun reported mixing construction waste into its print mortar ^[3].

as of 2026-11-11. No opened source gives amounts per square metre of wall; criticality is the writer's judgement: the inputs are bulk materials.

#### Critical materials

The materials whose supply could hold it back

- No scarce material holds it back: cement, sand and admixtures are made in large amounts everywhere.
- Print mortars depend on special admixtures; the chemicals firm Degussa joined the USC project to develop mixes suited to the process ^[2].

as of 2026-11-11

#### Sources

1. [Degussa AG Will Work on USC 'House-Printing' Project System Will Build 2,000-Square-Foot House in 24 Hours, Says Inventor](https://viterbischool.usc.edu/?p=42948) USC Viterbi School of Engineering, 2004
2. [Chinese firm 3D prints 10 full-sized homes in a day - Video](https://constructionenquirer.com/2014/04/28/chinese-firm-prints-10-full-sized-homes-in-a-day) The Construction Enquirer, 2014

## Other sections

- [Summary](https://www.materialinsights.org/technologies/concrete_3d_printing/index.md)
- [Overview](https://www.materialinsights.org/technologies/concrete_3d_printing/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/concrete_3d_printing/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/concrete_3d_printing/tech-evolution/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/concrete_3d_printing/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/concrete_3d_printing/tech-industries/index.md)
