# Crucible steel: Overview

Source page: https://www.materialinsights.org/technologies/crucible_steel/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

Crucible steel is made by melting iron with carbon in a closed clay pot, which gives a uniform, high-carbon steel free of the slag found in forged iron. South Indian wootz ingots made this way were forged into Damascus blades ^[1]. In Sheffield from the 1740s it gave cast steel ^[3]. The last commercial crucible melt there was in 1971 ^[3].

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

Smiths sealed iron and a source of carbon inside a clay crucible ^[2]. In the Indian routes the charge was either low-carbon bloomery iron with plant matter, which gave up its carbon, or a mix of low-carbon and high-carbon cast iron ^[2]. Many closed crucibles were stacked in a large furnace and fired for many hours ^[5]^[4]. As the iron took up carbon it melted, and impurities separated out, so the steel came out even all through. A typical Indian ingot held about 1.3% carbon ^[1]. In Sheffield, Benjamin Huntsman melted broken pieces of blister steel in clay crucibles in a coke-fired furnace that reached about 1,600 °C ^[3].

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Carbon in a typical wootz ingot, analysed in 1804 | 1.3 | % | 1804 | ^[1] |
| Carbon content of wootz steel, low end of 1.5 to 2.0% | 1.5 | % | – | ^[4] |
| Temperature of a Sheffield crucible furnace, about | 1600 | °C | 2010 | ^[3]^[7] |
| Length of a Sheffield melt, about | 3 | hours | 2010 | ^[3] |
| Length of an Indian firing cycle, up to | 24 | hours | – | ^[4] |

as of 2026-11-11. The 2010 year is the publication year of the datasheet [3], which describes historical practice, not a data year; the 1.5 to 2.0% and 24 hour figures are from an undated article [4].

#### Where it is used

The main places and products the technology is found in

- Damascus sword blades, forged in Persia from South Indian wootz ^[1]
- Wootz ingots made in South Indian centres, the last of them in Telangana until about the mid-19th century ^[2]
- Sheffield cast steel for tools and blades, made in crucibles from the 1740s until 1971 ^[3]^[7]

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Installed**
: None in commercial use: the last commercial crucible melt in Sheffield took place in 1971 ^[3], and none of the Indian centres survive ^[4]

**Unit**
: furnaces

**Year**
: 1971

**Note**
: Mass production of crucible steel had been made obsolete by Bessemer steel by the 1870s ^[3].

as of 2026-11-11

#### Sources

1. [Wootz crucible steel: a newly discovered production site in South India (Sharada Srinivasan, Papers from the Institute of Archaeology 5)](https://student-journals.ucl.ac.uk/pia/article/164/galley/241/view) UCL Institute of Archaeology, 1994
2. [A journey of over 200 years: early studies on wootz ingots and new evidence from Konasamudram, India (Jaikishan, Desai and Rehren, Advances in Archaeomaterials, accepted manuscript)](https://discovery-pp.ucl.ac.uk/10127689/1/1-s2.0-S2667136021000029-main.pdf) UCL Discovery, 2021
3. [Archaeology Datasheet 302: Steelmaking](https://historicalmetallurgy.org/media/eoikpxmw/hmsdatasheet302.pdf) Historical Metallurgy Society, 2010
4. [Wootz Steel: An Advanced Material of the Ancient World (S. Srinivasan and S. Ranganathan, Indian Institute of Science)](https://www.tf.uni-kiel.de/matwis/amat/def_en/articles/wootz_advanced_material/wootz_steel.html) University of Kiel, Faculty of Engineering (hosted copy), undated copy; the article gives no date or journal and its references run to 1997
5. [South Indian Iron Age iron and high carbon steel: with reference to Kadebakele and comparative insights from Mel-siruvalur (Srinivasan, Sinopoli, Morrison, Gopal and Ranganathan, in Mei and Rehren (eds), Metallurgy and Civilisation: Eurasia and Beyond, pp. 116 to 121)](https://core.ac.uk/download/484056392.pdf) Archetype, London (CORE open-access copy), 2009
6. [Crucible Furnace](https://www.sheffieldmuseums.org.uk/whats-on/crucible-furnace) Sheffield Museums Trust

## Other sections

- [Summary](https://www.materialinsights.org/technologies/crucible_steel/index.md)
- [Science](https://www.materialinsights.org/technologies/crucible_steel/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/crucible_steel/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/crucible_steel/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/crucible_steel/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/crucible_steel/tech-industries/index.md)
