# Computed tomography: Energy footprint

Source page: https://www.materialinsights.org/technologies/ct_scanner/tech-energy-footprint/

#### Energy in use

The energy it uses or converts while it works, and how efficiently

**Consumption**
: Mains electricity for the X-ray tube, rotating gantry, cooling and computers

**Conversion**
: Electrical energy to X-rays in the tube; most of the electrons' energy becomes heat in the target

**Note**
: No source gave energy per scan.

as of 2026-11-11

#### Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back
 Consumes

- [El Electricity](https://www.materialinsights.org/energy/electricity/) The tube, generator, gantry motors and reconstruction computers all run on mains electricity.
 Loses

- [Ht Heat](https://www.materialinsights.org/energy/heat/) Most of the electrical energy fed to the X-ray tube ends up as heat in the tungsten target, which must be cooled.

as of 2026-11-11

## Other sections

- [Summary](https://www.materialinsights.org/technologies/ct_scanner/index.md)
- [Overview](https://www.materialinsights.org/technologies/ct_scanner/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/ct_scanner/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/ct_scanner/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/ct_scanner/tech-materials/index.md)
- [Industries](https://www.materialinsights.org/technologies/ct_scanner/tech-industries/index.md)
