# Boiler heat recovery: Overview

Source page: https://www.materialinsights.org/technologies/e_boiler_recovery/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

A boiler's exhaust gas leaves the chimney hot, carrying away fuel that has already been paid for. Boiler heat recovery takes some of that heat back into the boiler's feed water or combustion air, so less fuel is needed for the same steam. Green's economiser, invented in 1845, is an early and long-lived form ^[1]. Fitting a feedwater economiser cuts fuel use by 5 to 10% ^[2].

as of 2026-11-12

#### How it works

The working principle in plain words, step by step

Flue gas leaves a boiler hotter than the steam it has made. A feedwater economiser is a bank of tubes in the gas path: cold feed water flows through the tubes and takes heat from the gas on its way to the boiler ^[2]. A rule of thumb from the US Department of Energy is that boiler efficiency rises by about 1% for every 40°F (about 22°C) the flue gas is cooled ^[2]. The gas cannot be cooled without limit, because water vapour in it condenses below its dew point, about 135°F for natural gas, and the acidic condensate can corrode the stack ^[3]^[4]. Condensing economisers use corrosion-resistant materials and cool the gas below the dew point, recovering the heat of condensation as well ^[3]. Related devices warm combustion air with the flue gas, or recover heat from the hot water drained from the boiler (blowdown) ^[5]^[6].

as of 2026-11-12

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Boiler efficiency gain for each 40°F (about 22°C) fall in flue gas temperature | 1 | % | 2012 | ^[2] |
| Fuel saving from a feedwater economiser, top of the 5 to 10% range | 10 | % | 2012 | ^[2] |
| Combustion efficiency, boiler with feedwater and condensing economizer, top of 92 to 95% | 95 | % | 2012 | ^[3] |
| Combustion efficiency, boiler alone, top of 78 to 83% | 83 | % | 2012 | ^[3] |
| Green's economisers installed | 130,000 | units | 1895 | ^[1] |
| Fuel saved by the first Ljungstrom air preheater, up to | 25 | % | 1922 | ^[6] |

as of 2026-11-12. The four tip-sheet figures carry 2012, the year the Department of Energy sheets were published; they are typical ranges with no data year. The 25% saving is for the first installation, a chocolate factory in Stockholm in 1922 [6].

#### Where it is used

The main places and products the technology is found in

- Industrial steam boilers, where feedwater economisers cut fuel use ^[2]
- Boilers with continuous blowdown above 5% of the steam rate, where the drained hot water gives up its heat ^[5]
- Utility boilers, where a Ljungstrom air preheater provides up to 20% of the heat transfer ^[6]
- Diesel engine exhausts, as in a 1966 order of economiser units for a Norwegian shipbuilder ^[1]

as of 2026-11-12

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Users**
: Industrial and utility boiler owners

**Unit**
: units

**Year**
: 1895

**Note**
: No source opened gives a world count of economisers today. One firm alone had installed 130,000 by 1895 ^[1].

as of 2026-11-12

#### Sources

1. [E. Green and Son](https://www.gracesguide.co.uk/Edward_Green_and_Son) Grace's Guide to British Industrial History
2. [Use Feedwater Economizers for Waste Heat Recovery, Steam Tip Sheet #3 (DOE/GO-102012-3412)](https://www.energy.gov/sites/prod/files/2014/05/f16/steam3_recovery.pdf) US DOE Advanced Manufacturing Office, 2012
3. [Consider Installing a Condensing Economizer, Steam Tip Sheet #26A](https://www1.eere.energy.gov/manufacturing/tech_assistance/pdfs/steam26a_condensing.pdf) US Department of Energy, Advanced Manufacturing Office, 2012
4. [Considerations When Selecting a Condensing Economizer, Steam Tip Sheet #26B (DOE/GO-102012-3397)](https://www.energy.gov/sites/prod/files/2014/05/f16/steam26b_condensing.pdf) US DOE Advanced Manufacturing Office, 2012
5. [Recover Heat from Boiler Blowdown, Steam Tip Sheet #10 (DOE/GO-102012-3408)](https://www.energy.gov/sites/prod/files/2014/05/f16/steam10_boiler_blowdown.pdf) US DOE Advanced Manufacturing Office, 2012
6. [Ljungstrom Air Preheater, ASME Landmark 185](https://www.asme.org/about-asme/engineering-history/landmarks/185-ljungstrom-air-preheater) American Society of Mechanical Engineers

## Other sections

- [Summary](https://www.materialinsights.org/technologies/e_boiler_recovery/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_boiler_recovery/overview/index.md)
- [Correlation](https://www.materialinsights.org/technologies/e_boiler_recovery/correlation/index.md)
- [Science and thermodynamics](https://www.materialinsights.org/technologies/e_boiler_recovery/rc-sci/index.md)
- [Engineering and integration](https://www.materialinsights.org/technologies/e_boiler_recovery/rc-eng/index.md)
- [Economics and contracts](https://www.materialinsights.org/technologies/e_boiler_recovery/rc-econ/index.md)
- [Impact and additionality](https://www.materialinsights.org/technologies/e_boiler_recovery/rc-impact/index.md)
- [What to track](https://www.materialinsights.org/technologies/e_boiler_recovery/tracking/index.md)
- [Science](https://www.materialinsights.org/technologies/e_boiler_recovery/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/e_boiler_recovery/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/e_boiler_recovery/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/e_boiler_recovery/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/e_boiler_recovery/tech-industries/index.md)
- [Relationships](https://www.materialinsights.org/technologies/e_boiler_recovery/links/index.md)
