# Boiler heat recovery: Science

Source page: https://www.materialinsights.org/technologies/e_boiler_recovery/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Heat conduction (Fourier's law)](https://www.materialinsights.org/science/heat_conduction/) Heat passes from the hot gas through the tube wall into the cooler water, the flow that Fourier analysed in 1822 ^[7].
- [First law of thermodynamics](https://www.materialinsights.org/science/first_law_thermodynamics/) Energy is conserved, so heat taken from the gas is heat the boiler does not have to make; Joule's measurement of the mechanical equivalent of heat, reported in 1849, led to this first law ^[9].

as of 2026-11-12

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1822 | Joseph Fourier | Published The Analytical Theory of Heat, the basis for working out how heat moves through solids ^[7] |
| 1824 | Sadi Carnot | Published Reflections on the Motive Power of Fire, showing that an ideal engine's efficiency depends only on its temperature difference ^[8] |
| 1849 | James Prescott Joule | Reported to the Royal Society his experiment connecting mechanical action and heat ^[9] |

as of 2026-11-12

#### Physical limits

The limits nature sets, today's best and how far there is still to go

| Limit | Value | Unit | Best today | Gap |
|---|---|---|---|---|
| Dew point of flue gas from natural gas: below this the water vapour condenses, so the gas cannot be cooled further without corrosion-resistant equipment | 135 | °F | Condensing economisers cool flue gas to as low as 75°F and lift boiler efficiency above 90% ^[4] | Below the dew point the heat of condensation is recovered too, which is why the best units pass 90%; the condensate is acidic and must be neutralised ^[4]. |

as of 2026-11-12

#### The science explained

The science behind it explained for a curious reader

Imagine a radiator, but running the other way. In a boiler, the hot gas from the flame boils water for steam and then leaves up the chimney still hot. An economiser puts a second radiator in that chimney path, and cold feed water, on its way to the boiler, flows through it and takes the gas's heat by conduction through the tube walls ^[7]. Every 40°F the gas is cooled adds about 1% to boiler efficiency ^[2]. The trick stops at the dew point, where the water vapour made by burning the fuel turns to liquid. Above it the gas is dry and harmless; below it, acidic water forms on the metal ^[4]. A condensing economiser is built to take that: it gets back both the heat of the gas and the large heat released when the vapour condenses, which is how efficiency passes 90% ^[4].

as of 2026-11-12

#### Sources

1. [Use Feedwater Economizers for Waste Heat Recovery, Steam Tip Sheet #3 (DOE/GO-102012-3412)](https://www.energy.gov/sites/prod/files/2014/05/f16/steam3_recovery.pdf) US DOE Advanced Manufacturing Office, 2012
2. [Considerations When Selecting a Condensing Economizer, Steam Tip Sheet #26B (DOE/GO-102012-3397)](https://www.energy.gov/sites/prod/files/2014/05/f16/steam26b_condensing.pdf) US DOE Advanced Manufacturing Office, 2012
3. [Joseph Fourier](https://www.britannica.com/biography/Joseph-Baron-Fourier) Encyclopaedia Britannica
4. [June 12, 1824: Sadi Carnot Publishes Treatise on Heat Engines](https://aps.org/apsnews/2009/05/sadi-carnot-heat-engines) APS News, American Physical Society, 2009
5. [June 1849: James Prescott Joule and the Mechanical Equivalent of Heat](https://www.aps.org/apsnews/2015/06/joule-mechanical-equivalent-heat) APS News, American Physical Society, 2015

## Other sections

- [Summary](https://www.materialinsights.org/technologies/e_boiler_recovery/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_boiler_recovery/overview/index.md)
- [Correlation](https://www.materialinsights.org/technologies/e_boiler_recovery/correlation/index.md)
- [Science and thermodynamics](https://www.materialinsights.org/technologies/e_boiler_recovery/rc-sci/index.md)
- [Engineering and integration](https://www.materialinsights.org/technologies/e_boiler_recovery/rc-eng/index.md)
- [Economics and contracts](https://www.materialinsights.org/technologies/e_boiler_recovery/rc-econ/index.md)
- [Impact and additionality](https://www.materialinsights.org/technologies/e_boiler_recovery/rc-impact/index.md)
- [What to track](https://www.materialinsights.org/technologies/e_boiler_recovery/tracking/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_boiler_recovery/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/e_boiler_recovery/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/e_boiler_recovery/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/e_boiler_recovery/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/e_boiler_recovery/tech-industries/index.md)
- [Relationships](https://www.materialinsights.org/technologies/e_boiler_recovery/links/index.md)
