# Geothermal direct use and ground-source heat pumps: Overview

Source page: https://www.materialinsights.org/technologies/e_geo_direct/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

Geothermal direct use puts the Earth's heat to work as heat, with no electricity made on the way. Warm water from springs and wells fills baths and pools, heats district networks, greenhouses and fish ponds, and dries crops and timber. Ground-source heat pumps tap the mild, steady warmth of shallow ground to heat and cool buildings almost anywhere. Direct use reached about 107 GW of heating capacity in 2020, and 88 countries report using it ^[2].

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

A few metres down, the ground stays at a fairly constant temperature all year, about 4.5 to 21 °C ^[3]. Deeper, it is hotter, and in some places hot water rises in springs or can be pumped from wells. For direct use, a production well brings the hot fluid up, a heat exchanger hands its heat to a clean secondary loop that serves the user, and the cooled fluid is usually pumped back down an injection well ^[2]. A ground-source heat pump works with the cooler shallow ground instead. Water or a water and glycol mix circulates through buried pipes or boreholes, picks up heat from the soil and passes it to the refrigerant in the heat pump ^[3]. The compressor then raises that heat to a useful temperature; in summer the system runs the other way and puts heat back into the ground ^[2].

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Installed direct-use capacity worldwide | 107 | GW (thermal) | 2020 | ^[2] |
| Share of that capacity in ground-source heat pumps | 59 | % | 2020 | ^[2] |
| Share of world direct-use capacity in China | 40 | % | 2020 | ^[2] |
| Average yearly growth of installed capacity, 2015 to 2020 | 8.7 | % | 2020 | ^[2] |
| Best seasonal performance factor (heat delivered per unit of electricity) of 13 ground-source heat pumps in a German field test | 5.4 | ratio | 2024 | ^[5] |

as of 2026-11-11. The ESMAP report gives the 59% and 40% shares alongside its 2020 capacity figure [2]. The field-test row is one study of existing German homes, with a range of 3.6 to 5.4, not a general rule [5].

#### Where it is used

The main places and products the technology is found in

- Ground-source heat pumps in homes, offices and schools, for heating and cooling
- District heating networks fed by hot wells, as in Reykjavík since the 1930s ^[2]
- Spas, bathing and swimming pools
- Greenhouses, fish farms and crop and timber drying
- Industrial heat, for example in dairy, pulp and paper plants ^[2]

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Installed**
: about 107 GW of thermal capacity, 59% of it in ground-source heat pumps ^[2]

**Users**
: 88 countries report direct use; 24 of them hold 96% of the capacity ^[2]

**Unit**
: GW of thermal capacity

**Year**
: 2020

**Note**
: Capacity is the latest world figure in the World Bank ESMAP review, which dates it to 2020 ^[2]. China holds about 40% of it ^[2].

as of 2026-11-11

#### Sources

1. [Direct Utilization of Geothermal Resources](https://esmap.org/sites/default/files/esmap-files/16103-WB_ESMAP%20Direct%20Use-WEB.pdf) World Bank, Energy Sector Management Assistance Program (ESMAP), 2022, Technical Report 021/22 (printed "Technical Report 21/22" on the cover); executive summary and chapter 1
2. [Geothermal Heat Pumps (Energy Saver)](https://www.energy.gov/energysaver/geothermal-heat-pumps) US Department of Energy, 2024
3. [HP-QA in Existing Buildings (WP-QS im Bestand)](https://www.ise.fraunhofer.de/en/research-projects/wp-qs-im-bestand.html) Fraunhofer Institute for Solar Energy Systems ISE

## Other sections

- [Summary](https://www.materialinsights.org/technologies/e_geo_direct/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_geo_direct/overview/index.md)
- [Correlation](https://www.materialinsights.org/technologies/e_geo_direct/correlation/index.md)
- [Efficiency](https://www.materialinsights.org/technologies/e_geo_direct/efficiency/index.md)
- [Techniques](https://www.materialinsights.org/technologies/e_geo_direct/techniques/index.md)
- [Resources and labour](https://www.materialinsights.org/technologies/e_geo_direct/resources/index.md)
- [Impact on the biosphere](https://www.materialinsights.org/technologies/e_geo_direct/biosphere/index.md)
- [Science](https://www.materialinsights.org/technologies/e_geo_direct/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/e_geo_direct/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/e_geo_direct/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/e_geo_direct/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/e_geo_direct/tech-industries/index.md)
- [Relationships](https://www.materialinsights.org/technologies/e_geo_direct/links/index.md)
