# Lighting and displays: Science

Source page: https://www.materialinsights.org/technologies/e_lighting/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Limited by

- [Blackbody radiation](https://www.materialinsights.org/science/blackbody_radiation/) A hot filament glows like a black body and puts most of its energy into infrared, which is why incandescent lamps waste most of their power.
 Relies on 4

- [Electroluminescence](https://www.materialinsights.org/science/electroluminescence/) In an LED, current makes a semiconductor give off light directly, with no hot filament.
- [The p-n junction](https://www.materialinsights.org/science/pn_junction/) Electrons and holes meet at the junction between two kinds of semiconductor and release photons.
- [Band theory of solids](https://www.materialinsights.org/science/band_theory/) The band gap of the chip sets the colour of the light; blue needed wide-gap gallium nitride.
- [Liquid crystals](https://www.materialinsights.org/science/liquid_crystals/) In LCD screens, liquid crystals twist light so each pixel can pass or block the backlight.

as of 2026-11-10

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1806 | Humphry Davy | Demonstrated an electric arc lamp, too blinding and short-lived to be practical ^[1] |
| 1878 | Joseph Swan | Demonstrated an incandescent lamp with a carbon filament that could run for hours ^[1] |
| 1993 | Shuji Nakamura | Made the first high-brightness blue LED, after work by Akasaki and Amano on gallium nitride ^[5] |

as of 2026-11-10

#### Physical limits

The limits nature sets, today's best and how far there is still to go

| Limit | Value | Unit | Best today | Gap |
|---|---|---|---|---|
| Most lumens a watt of light can give, for green light at 540 THz where the eye is most sensitive (fixed by the SI definition of the candela) | 683 | lm/W | Best LED products reach up to 230 lm/W ^[3] | White light must include red and blue, which the eye sees less well, and chips, phosphors and drivers all lose energy as heat |
| Light from a glowing filament, set by the temperature tungsten can stand | – | lm/W | About 16 lm/W for regular incandescent bulbs ^[4] | Most of the radiation is infrared; this is why filament lamps are being phased out |

as of 2026-11-10

#### The science explained

The science behind it explained for a curious reader

Light is measured in lumens, which count each colour by how bright it looks to the human eye. The eye is most sensitive to green, and the SI units fix the top score: one watt of pure green light at 540 THz gives 683 lumens ^[6]. An old bulb is a tiny electric heater that happens to glow, so it manages only about 16 lumens per watt ^[4]. An LED skips the heat. In its chip each electron that crosses a junction can release one photon of blue light, and a phosphor softens that into white. That is why an average LED gives about 100 lumens per watt and the best about 230 ^[3]. The gap to 683 is the price of making white light from blue and of the heat lost in the chip, phosphor and driver.

as of 2026-11-10

#### Sources

1. [Electric Lighting](https://gracesguide.co.uk/Electric_Lighting) Grace's Guide to British Industrial History
2. [The next wave of LED lighting: smarter, circular and more efficient (commentary)](https://www.iea.org/commentaries/the-next-wave-of-led-lighting-smarter-circular-and-more-efficient) International Energy Agency, 2026
3. [The Nobel Prize in Physics 2014: press release](https://www.nobelprize.org/prizes/physics/2014/press-release/) The Royal Swedish Academy of Sciences (nobelprize.org), 2014
4. [Isamu Akasaki, Hiroshi Amano and Shuji Nakamura win 2014 Nobel Prize for Physics](https://physicsworld.com/a/isamu-akasaki-hiroshi-amano-and-shuji-nakamura-win-2014-nobel-prize-for-physics/) Physics World, 2014
5. [Mise en pratique for the definition of the candela and associated derived units for photometric and radiometric quantities in the SI (SI Brochure, Appendix 2)](https://www.bipm.org/utils/en/pdf/si-mep/SI-App2-candela.pdf) Bureau International des Poids et Mesures, 2021

## Other sections

- [Summary](https://www.materialinsights.org/technologies/e_lighting/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_lighting/overview/index.md)
- [Correlation](https://www.materialinsights.org/technologies/e_lighting/correlation/index.md)
- [Science and limits](https://www.materialinsights.org/technologies/e_lighting/science/index.md)
- [Value chain](https://www.materialinsights.org/technologies/e_lighting/valuechain/index.md)
- [Unit economics](https://www.materialinsights.org/technologies/e_lighting/economics/index.md)
- [Engineering methods](https://www.materialinsights.org/technologies/e_lighting/methods/index.md)
- [Equipment and suppliers](https://www.materialinsights.org/technologies/e_lighting/equipment/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_lighting/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/e_lighting/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/e_lighting/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/e_lighting/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/e_lighting/tech-industries/index.md)
- [Relationships](https://www.materialinsights.org/technologies/e_lighting/links/index.md)
