# Pressure and flow recovery: Overview

Source page: https://www.materialinsights.org/technologies/e_pressure_recovery/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

Pressure and flow recovery catches the energy in a gas or liquid that is being let down from high pressure, using a turbine or pressure exchanger instead of a throttling valve. A turboexpander turns the fluid's energy into mechanical work, and more than 5,000 are in operation worldwide ^[1]. In seawater desalination a pressure exchanger passes brine pressure back to incoming seawater at over 95% efficiency ^[2].

as of 2026-11-12

#### How it works

The working principle in plain words, step by step

Dropping a high-pressure fluid across a valve wastes its energy. An expander makes the gas pass through a turbine wheel, where it expands, cools and does work; most turboexpanders drive a compressor or a generator ^[1]. Isentropic efficiencies, the share of the ideal work obtained, as high as 90% are readily reached ^[1]. For liquids, a power recovery turbine is a pump run in reverse ^[3]. In reverse osmosis desalination, the brine leaving the membranes is still at high pressure. Pelton wheels recover some of it, but only about 60% in typical conditions, while a pressure exchanger recycles it directly to incoming seawater at over 95% ^[2]. In oil refineries, a power recovery train with an expander, an air blower and a motor-generator takes energy from the flue gas of fluid catalytic cracking units ^[4].

as of 2026-11-12

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Turboexpanders in operation worldwide, more than | 5000 | units | 2020 | ^[1] |
| Isentropic efficiency readily achieved by a turboexpander, as high as | 90 | % | 2020 | ^[1] |
| Efficiency of a pressure exchanger returning brine energy to seawater, over | 95 | % | 2003 | ^[2] |
| Typical efficiency of Pelton devices in desalination, about | 60 | % | 2003 | ^[2] |
| Typical efficiency of a power recovery turbine, top of the 40 to 80% range | 80 | % | 2014 | ^[3] |
| Output of a Sulzer turbine from a 10 bar pressure drop, with efficiency above 80% | 470 | kW | – | ^[5] |

as of 2026-11-12. No source gives a data year, so the years are publication years: 2020 for the L.A. Turbine article [1], 2003 for the WaterWorld article, written by the head of the pressure exchanger's maker [2], and 2014 for IPIECA's last review [3]. The Sulzer page shows no date [5].

#### Where it is used

The main places and products the technology is found in

- Natural gas liquefaction and dewpoint control, where turboexpanders are standard ^[1]
- Ethylene plants and air separation in the petrochemical industry ^[1]
- Refineries, where an expander takes energy from the flue gas of fluid catalytic cracking units ^[4]
- Seawater reverse osmosis desalination, where brine pressure is recycled ^[2]
- Petrochemical, refinery and fertiliser plants using power recovery turbines of 50 kW to 3 MW ^[5]

as of 2026-11-12

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Installed**
: more than 5,000 turboexpanders in operation globally

**Users**
: Gas processors, petrochemical plants, refineries and desalination plants

**Unit**
: units

**Note**
: The count is for turboexpanders only ^[1]; no world count of pressure exchangers or power recovery turbines was found.

as of 2026-11-12

#### Sources

1. [Fundamentals of turboexpander design and operation](https://gasprocessingnews.com/features/202006/fundamentals-of-turboexpander-design-and-operation) Gas Processing & LNG (T. Avetian and L. E. Rodriguez, L.A. Turbine), 2020
2. [Pressure exchange technology makes seawater desalination affordable](https://www.waterworld.com/home/article/16200374/pressure-exchange-technology-makes-seawater-desalination-affordable) WaterWorld (G. G. Pique, chief executive of Energy Recovery, Inc.), 2003
3. [Power recovery turbines](https://www.ipieca.org/resources/energy-efficiency-solutions/power-recovery-turbines-2013) IPIECA energy efficiency solutions (topic last reviewed 1 February 2014), 2014
4. [Installing a power recovery system on FCC or RFCC units](https://digitalrefining.com/article/1000462/installing-a-power-recovery-system-on-fcc-or-rfcc-units) Digital Refining (Tek Sutikno, Samsung Engineering America), 2010
5. [Power recovery turbines](https://www.sulzer.com/en/shared/news/power-recovery-turbines) Sulzer

## Other sections

- [Summary](https://www.materialinsights.org/technologies/e_pressure_recovery/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_pressure_recovery/overview/index.md)
- [Correlation](https://www.materialinsights.org/technologies/e_pressure_recovery/correlation/index.md)
- [Science and thermodynamics](https://www.materialinsights.org/technologies/e_pressure_recovery/rc-sci/index.md)
- [Engineering and integration](https://www.materialinsights.org/technologies/e_pressure_recovery/rc-eng/index.md)
- [Economics and contracts](https://www.materialinsights.org/technologies/e_pressure_recovery/rc-econ/index.md)
- [Impact and additionality](https://www.materialinsights.org/technologies/e_pressure_recovery/rc-impact/index.md)
- [What to track](https://www.materialinsights.org/technologies/e_pressure_recovery/tracking/index.md)
- [Science](https://www.materialinsights.org/technologies/e_pressure_recovery/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/e_pressure_recovery/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/e_pressure_recovery/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/e_pressure_recovery/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/e_pressure_recovery/tech-industries/index.md)
- [Relationships](https://www.materialinsights.org/technologies/e_pressure_recovery/links/index.md)
