# Pressure and flow recovery: Science

Source page: https://www.materialinsights.org/technologies/e_pressure_recovery/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [First law of thermodynamics](https://www.materialinsights.org/science/first_law_thermodynamics/) Energy is conserved, the principle that Joule's experiments of 1849 led to ^[7]; the pressure energy of the fluid reappears as shaft work instead of being lost in a valve.
- [Bernoulli's principle](https://www.materialinsights.org/science/bernoulli_principle/) Pressure in a fluid falls as its speed rises ^[8], which is how the gas gives up pressure while speeding through the nozzles and blades of the expander.
- [Joule-Thomson effect](https://www.materialinsights.org/science/joule_thomson_effect/) Expanding a fluid across a valve can cool it ^[9]; making the gas do work in an expander cools it further ^[1], which is why expanders are used in refrigeration cycles.

as of 2026-11-12

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1738 | Daniel Bernoulli | Hydrodynamica set out the relation between a fluid's speed and its pressure ^[8] |
| 1849 | James Prescott Joule | Reported to the Royal Society the work that became the base of the first law of thermodynamics, the conservation of energy ^[7] |
| 1852 | James Joule and William Thomson | First observed the cooling of a fluid expanded from high to low pressure, the Joule-Thomson effect ^[9] |

as of 2026-11-12

#### Physical limits

The limits nature sets, today's best and how far there is still to go

| Limit | Value | Unit | Best today | Gap |
|---|---|---|---|---|
| Isentropic efficiency of an expander: the ideal expansion, with no loss, obtains 100% of the available work | 100 | % | Turboexpanders readily reach isentropic efficiencies as high as 90%, with the turbine stage between the mid-80s and low-90s ^[1] | Calculated: about 10 percentage points at best for gas expanders. Power recovery turbines for liquids are typically 40 to 80% ^[3]. |

as of 2026-11-12

#### The science explained

The science behind it explained for a curious reader

Open a tap at the bottom of a tall tank and the water shoots out, throwing away the height it fell. Put a water wheel in the stream and some of that fall turns the wheel. Gas under pressure is the same: let it through a valve and its pressure energy ends up as noise and a little heat, but pass it through a turbine and it turns a shaft ^[1]. Bernoulli found in 1738 that pressure in a moving fluid falls as its speed rises ^[8], and the turbine wheel catches the speed that this pressure drop creates. Because the gas does work, it also cools more than in a valve ^[1]^[9]. For desalination the trick is different: a pressure exchanger lets high-pressure brine push fresh seawater straight to high pressure, with over 95% efficiency ^[2].

as of 2026-11-12

#### Sources

1. [Fundamentals of turboexpander design and operation](https://gasprocessingnews.com/features/202006/fundamentals-of-turboexpander-design-and-operation) Gas Processing & LNG (T. Avetian and L. E. Rodriguez, L.A. Turbine), 2020
2. [Pressure exchange technology makes seawater desalination affordable](https://www.waterworld.com/home/article/16200374/pressure-exchange-technology-makes-seawater-desalination-affordable) WaterWorld (G. G. Pique, chief executive of Energy Recovery, Inc.), 2003
3. [Power recovery turbines](https://www.ipieca.org/resources/energy-efficiency-solutions/power-recovery-turbines-2013) IPIECA energy efficiency solutions (topic last reviewed 1 February 2014), 2014
4. [June 1849: James Prescott Joule and the Mechanical Equivalent of Heat](https://www.aps.org/apsnews/2015/06/joule-mechanical-equivalent-heat) APS News, American Physical Society, 2015
5. [Hydrodynamica](https://www.britannica.com/topic/Hydrodynamica) Encyclopaedia Britannica
6. [Joule-Thomson Effect](https://cold-facts.org/2011/09/26/joule-thomson_effect/) Cold Facts (Cryogenic Society of America)

## Other sections

- [Summary](https://www.materialinsights.org/technologies/e_pressure_recovery/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_pressure_recovery/overview/index.md)
- [Correlation](https://www.materialinsights.org/technologies/e_pressure_recovery/correlation/index.md)
- [Science and thermodynamics](https://www.materialinsights.org/technologies/e_pressure_recovery/rc-sci/index.md)
- [Engineering and integration](https://www.materialinsights.org/technologies/e_pressure_recovery/rc-eng/index.md)
- [Economics and contracts](https://www.materialinsights.org/technologies/e_pressure_recovery/rc-econ/index.md)
- [Impact and additionality](https://www.materialinsights.org/technologies/e_pressure_recovery/rc-impact/index.md)
- [What to track](https://www.materialinsights.org/technologies/e_pressure_recovery/tracking/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_pressure_recovery/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/e_pressure_recovery/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/e_pressure_recovery/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/e_pressure_recovery/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/e_pressure_recovery/tech-industries/index.md)
- [Relationships](https://www.materialinsights.org/technologies/e_pressure_recovery/links/index.md)
