# Steam turbines and thermal power plants: Science

Source page: https://www.materialinsights.org/technologies/e_steam_turbines/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Limited by

- [Carnot's limit on heat engines](https://www.materialinsights.org/science/carnot_cycle/) Carnot showed that the share of heat a steam plant can turn into work is set by the temperatures it works between ^[8], so plants push steam ever hotter.
- [Second law of thermodynamics](https://www.materialinsights.org/science/second_law_thermodynamics/) Some heat must always be rejected to a cold sink; in coal and nuclear steam plants about two thirds of the energy is lost this way ^[7].
 Relies on

- [Latent heat](https://www.materialinsights.org/science/latent_heat/) Boiling water takes in a large amount of heat, and the condenser must give that heat up again, which is why so much is lost to cooling water.
- [Bernoulli's principle](https://www.materialinsights.org/science/bernoulli_principle/) Fixed blades work as nozzles that trade steam pressure for speed before the jet strikes the moving blades.

as of 2026-11-11

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1824 | Sadi Carnot | Showed that a heat engine's work is capped by the temperatures of its hot and cold bodies ^[8] |
| 1848 | William Thomson (Lord Kelvin) | Recognised the importance of Carnot's work, which he and others built into the science of thermodynamics ^[8] |
| 1850 | Rudolf Clausius | Showed that Carnot's theorem was correct, the root of the second law of thermodynamics ^[8] |

as of 2026-11-11

#### Physical limits

The limits nature sets, today's best and how far there is still to go

| Limit | Value | Unit | Best today | Gap |
|---|---|---|---|---|
| Carnot limit between the steam temperature and the cooling water | – | % | 49.37% net (lower heating value) at Pingshan Phase II, a 1,350 MW coal unit ^[4] | Heat is added over a range of temperatures, flue gas leaves warm and the turbine has friction losses |
| Steam temperature that boiler tubes and turbine parts can survive (the advanced ultra-supercritical target) | 760 | °C | A US consortium had developed and tested nickel alloys for steam up to 760 °C by the end of 2015; the record Pingshan unit uses mature 600 °C-class materials ^[6]^[4] | Hotter steam needs costly nickel alloys in place of steel |

as of 2026-11-11

#### The science explained

The science behind it explained for a curious reader

Think of a steam plant as a waterfall for heat. Heat falls from the hot boiler to the cold condenser, and the turbine sits in the fall and catches part of it as work, the way a water wheel catches part of a falling stream. Carnot showed in 1824 that the share you can catch depends only on how high the fall is, from the hot temperature to the cold one ^[8]. The cold end is fixed by the river or sea that cools the condenser, so engineers raise the hot end: from saturated steam to supercritical steam, where water turns to vapour without boiling, and towards 760 °C with nickel alloys ^[6]. Even so, in coal and nuclear steam plants about two thirds of the energy ends up as warm cooling water ^[7].

as of 2026-11-11

#### Sources

1. [China's Pingshan Phase II Sets New Bar as World's Most Efficient Coal Power Plant](https://www.powermag.com/chinas-pingshan-phase-ii-sets-new-bar-as-worlds-most-efficient-coal-power-plant) POWER Magazine, 2023
2. [Materials Matter: The Advanced Ultrasupercritical Boiler Consortium](https://www.power-eng.com/operations-maintenance/materials-matter-the-advanced-ultrasupercritical-boiler-consortium/) Power Engineering, 2016
3. [Cooling Power Plants](https://world-nuclear.org/information-library/current-and-future-generation/cooling-power-plants) World Nuclear Association, 2026, page updated 8 September 2026
4. [Carnot, Nicolas Léonard Sadi](https://encyclopedia.com/people/science-and-technology/physics-biographies/nicolas-leonard-sadi-carnot) Encyclopedia.com (Encyclopedia of World Biography; Complete Dictionary of Scientific Biography)

## Other sections

- [Summary](https://www.materialinsights.org/technologies/e_steam_turbines/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_steam_turbines/overview/index.md)
- [Correlation](https://www.materialinsights.org/technologies/e_steam_turbines/correlation/index.md)
- [Science and limits](https://www.materialinsights.org/technologies/e_steam_turbines/science/index.md)
- [Value chain](https://www.materialinsights.org/technologies/e_steam_turbines/valuechain/index.md)
- [Unit economics](https://www.materialinsights.org/technologies/e_steam_turbines/economics/index.md)
- [Engineering methods](https://www.materialinsights.org/technologies/e_steam_turbines/methods/index.md)
- [Equipment and suppliers](https://www.materialinsights.org/technologies/e_steam_turbines/equipment/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_steam_turbines/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/e_steam_turbines/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/e_steam_turbines/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/e_steam_turbines/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/e_steam_turbines/tech-industries/index.md)
- [Relationships](https://www.materialinsights.org/technologies/e_steam_turbines/links/index.md)
