# Steel plant energy recovery: Overview

Source page: https://www.materialinsights.org/technologies/e_steel_recovery/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

A steelworks has two large flows of waste energy: the red-hot coke pushed out of the coke ovens, and the high-pressure gas leaving the blast furnace. Dry quenching cools the coke with gas and raises steam ^[1]. A top-pressure turbine lets blast furnace gas expand through a generator ^[5]. Dry quenching was first used on an industrial scale in the Soviet Union in the 1960s ^[2], and Japan's first top-pressure turbine was delivered in 1974 ^[5].

as of 2026-11-12

#### How it works

The working principle in plain words, step by step

Coke is made by heating coal in ovens and comes out red hot. The old way is to spray it with water, which wastes its heat as steam. In dry quenching the coke is instead cooled in a closed chamber by a stream of gas pushed through it by a fan, and the hot gas then passes through a heat exchange device ^[3]. That heat raises steam, which can drive a turbine: a practitioner estimate is that a 200 tonne an hour unit can generate around 36 MW of power ^[1]. The second system works on the blast furnace, which runs at a pressure above the atmosphere. After the gas is cleaned, a top-pressure recovery turbine lets it expand to atmospheric pressure through a turbine that drives a generator ^[5]. Without it, the gas pressure is simply thrown away across a valve ^[5].

as of 2026-11-12

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Power from a 200 tonne an hour coke dry quenching unit, around (practitioner estimate) | 36 | MW | – | ^[1] |
| Share of coal carbonisation waste heat recovered by coke dry quenching (practitioner estimate) | 85 | % | – | ^[1] |
| Power from a top-pressure recovery turbine, top of the 15 to 60 range (practitioner estimate) | 60 | kWh per tonne of hot metal | – | ^[4] |
| Share of a blast furnace's power need that its turbine can meet, around (practitioner estimate) | 30 | % | – | ^[4] |
| Share of a steel plant's energy needs met by co-product gases, more than | 60 | % | 2024 | ^[6] |
| Energy used to make a tonne of steel | 20.95 | GJ per tonne | 2024 | ^[6] |

as of 2026-11-12. The first four are practitioner estimates for typical units from IspatGuru articles of 2013 and 2014, not measured world averages [1][4]. The 2024 figures are worldsteel's, on a page dated 2026 [6].

#### Where it is used

The main places and products the technology is found in

- Coking plants attached to blast furnace steelworks, which cool coke by dry quenching ^[1]^[2]
- Blast furnaces with top-pressure recovery turbines in the gas line ^[5]^[7]
- Steel plants that burn co-product gases from the coke oven, blast furnace and oxygen furnace for power and heat ^[6]

as of 2026-11-12

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Installed**
: 43

**Users**
: Integrated steelworks

**Unit**
: coke dry quenching systems in China

**Year**
: 2006

**Note**
: By the end of 2006 China owned 43 coke dry quenching systems ^[2]. One maker, Kawasaki, counts 48 turbine plants delivered by August 2024 ^[5]. No world total was found.

as of 2026-11-12

#### Sources

1. [Dry cooling of coke (practitioner article, second-hand)](https://www.ispatguru.com/dry-cooling-of-coke/) IspatGuru (Satyendra Kumar Sarna)
2. [Coke dry quenching for iron and steel sector](https://www.ctc-n.org/node/25918) UNFCCC Climate Technology Centre and Network (CTCN)
3. [Coke cooling system (CH101570A)](https://patents.google.com/patent/CH101570A/en) Google Patents (Sulzer AG)
4. [Blast furnace gas top pressure recovery turbine (practitioner article, second-hand)](https://www.ispatguru.com/blast-furnace-gas-top-pressure-recovery-turbine) IspatGuru (Satyendra Kumar Sarna)
5. [Top-Pressure Recovery Turbine Plant (TRT), technology sheet S-08](https://www.jase-w.eccj.or.jp/technologies/pdf/iron_steel/S-08.pdf) Kawasaki Heavy Industries, on the Energy Conservation Center Japan's JASE-World site, 2024
6. [Energy use in the steel industry (fact sheet)](https://worldsteel.org/about-steel/energy-use-in-the-steel-industry/) World Steel Association, 2025
7. [Top pressure recovery turbines (product page; vendor claims)](https://global.kawasaki.com/en/energy/equipment/blast.html) Kawasaki Heavy Industries

## Other sections

- [Summary](https://www.materialinsights.org/technologies/e_steel_recovery/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_steel_recovery/overview/index.md)
- [Correlation](https://www.materialinsights.org/technologies/e_steel_recovery/correlation/index.md)
- [Science and thermodynamics](https://www.materialinsights.org/technologies/e_steel_recovery/rc-sci/index.md)
- [Engineering and integration](https://www.materialinsights.org/technologies/e_steel_recovery/rc-eng/index.md)
- [Economics and contracts](https://www.materialinsights.org/technologies/e_steel_recovery/rc-econ/index.md)
- [Impact and additionality](https://www.materialinsights.org/technologies/e_steel_recovery/rc-impact/index.md)
- [What to track](https://www.materialinsights.org/technologies/e_steel_recovery/tracking/index.md)
- [Science](https://www.materialinsights.org/technologies/e_steel_recovery/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/e_steel_recovery/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/e_steel_recovery/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/e_steel_recovery/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/e_steel_recovery/tech-industries/index.md)
- [Relationships](https://www.materialinsights.org/technologies/e_steel_recovery/links/index.md)
