# Thermochemical storage: Science

Source page: https://www.materialinsights.org/technologies/e_thermochem_store/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Chemical equilibrium (Le Chatelier's principle)](https://www.materialinsights.org/science/chemical_equilibrium/) A reversible reaction shifts one way when heated and the other way when cooled or given water vapour, which is what charges and discharges the store; Le Chatelier set out the principle in 1884 ^[5].
 Limited by

- [Heat conduction (Fourier's law)](https://www.materialinsights.org/science/heat_conduction/) Salt hydrates conduct heat poorly and water vapour moves slowly through their grains, which slows charging and discharging; composites are made to overcome this ^[4].

as of 2026-11-12

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1884 | Henry Le Chatelier | Stated the general principle for how a system in chemical equilibrium responds to a change in temperature or pressure ^[5] |
| 1976 | Researchers publishing on magnesium chloride | Magnesium chloride first appears in the literature for thermochemical water splitting, later a storage salt ^[2] |
| 1981 | Researchers publishing on magnesium sulphate | Magnesium sulphate is first published, a salt with high theoretical storage density ^[2] |

as of 2026-11-12

#### Physical limits

The limits nature sets, today's best and how far there is still to go

| Limit | Value | Unit | Best today | Gap |
|---|---|---|---|---|
| Theoretical energy density of the reaction: magnesium sulphate stores up to this much | 2.8 | GJ/m3 | No working store found near this; the 1 GJ/m3 system target for a home store is far from reached, and laboratory materials barely survive 20 cycles ^[1]^[2] | The gap is one of durability and engineering, not thermodynamics: salts swell, cake together and melt if over-hydrated, and heat and vapour must move through the bed ^[2]^[4]. |

as of 2026-11-12

#### The science explained

The science behind it explained for a curious reader

Think of a spring wound tight and held by a catch. Winding it took energy, and holding it costs nothing, however long you wait. A thermochemical store is a chemical spring. Heat pulls water out of a salt hydrate or a zeolite, and the dry solid and the water are kept apart, like the wound spring and its catch ^[2]. The energy stays locked in that separation, so the store loses almost nothing over months ^[1]. Releasing the catch means letting water vapour back in: the solid takes it up and gives out the stored heat. Le Chatelier's principle of 1884 says that a system in equilibrium pushes back against a change in temperature ^[5], which is why heating drives the water out and adding water brings the heat back. The hard part is wear: salts swell, cake and can melt as they cycle ^[4].

as of 2026-11-12

#### Sources

1. [A review of salt hydrates for seasonal heat storage in domestic applications (Donkers et al., Applied Energy 199, 45-68)](https://pure.tue.nl/ws/portalfiles/portal/65069212/1_s2.0_S0306261917304750_main.pdf) Eindhoven University of Technology repository, 2017
2. [Water sorption-based thermochemical storage materials: A review from material candidates to manufacturing routes (Palacios, Navarro, Barreneche and Ding)](https://www.frontiersin.org/articles/10.3389/fther.2022.1003863) Frontiers in Thermal Engineering, vol. 2, 2022
3. [Salt Hydrate Adsorption Material-Based Thermochemical Energy Storage for Space Heating Application: A Review (Yang et al.)](https://mdpi.com/1996-1073/16/6/2875) Energies, vol. 16, article 2875, 2023
4. [Henry-Louis Le Chatelier](https://www.britannica.com/biography/Henry-Louis-Le-Chatelier) Encyclopaedia Britannica

## Other sections

- [Summary](https://www.materialinsights.org/technologies/e_thermochem_store/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_thermochem_store/overview/index.md)
- [Correlation](https://www.materialinsights.org/technologies/e_thermochem_store/correlation/index.md)
- [Science and technology](https://www.materialinsights.org/technologies/e_thermochem_store/sg-sci/index.md)
- [Engineering and performance](https://www.materialinsights.org/technologies/e_thermochem_store/sg-eng/index.md)
- [Economics](https://www.materialinsights.org/technologies/e_thermochem_store/sg-econ/index.md)
- [Impact and additionality](https://www.materialinsights.org/technologies/e_thermochem_store/sg-impact/index.md)
- [What to track](https://www.materialinsights.org/technologies/e_thermochem_store/tracking/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_thermochem_store/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/e_thermochem_store/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/e_thermochem_store/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/e_thermochem_store/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/e_thermochem_store/tech-industries/index.md)
- [Relationships](https://www.materialinsights.org/technologies/e_thermochem_store/links/index.md)
