# Waste-heat power (steam Rankine): Overview

Source page: https://www.materialinsights.org/technologies/e_whr_rankine/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

Waste heat to power uses a steam cycle to make electricity from hot exhaust that would otherwise be lost. A boiler takes heat from a kiln, furnace or engine exhaust, and the steam drives a turbine ^[2]. Auguste Rateau was building turbines for low-pressure exhaust steam by 1902 ^[1]. Kawasaki alone has had orders for more than 270 such units for cement plants ^[3]. A US study found 8,840 MW of potential at 2,946 industrial sites ^[2].

as of 2026-11-12

#### How it works

The working principle in plain words, step by step

The plant follows the steam cycle that Rankine described in 1859 ^[4]^[5]. Water is pumped to high pressure and enters a heat recovery boiler ^[2]. The waste heat turns it to steam, which expands through a turbine that drives a generator ^[2]. The spent steam goes to a condenser, where it turns back to water, and the water returns to the pump ^[2]. A steam cycle needs high-grade heat to make superheated steam, so it suits hot exhausts such as kiln and furnace gas ^[2]. Steam turbines in this service range from 50 kW to several hundred megawatts ^[2]. Because it is a heat engine, its efficiency is only a fraction of the ideal Carnot figure: typically 30% to 50% of it ^[2]^[6].

as of 2026-11-12

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Waste-heat-to-power technical potential in US industry, from 2,946 sites | 8840 | MW | 2016 | ^[2] |
| Rankine cycle efficiency (steam or organic) as a share of Carnot efficiency, top of the 30 to 50% range | 50 | % of Carnot | 2021 | ^[2] |
| Capital cost of steam Rankine cycle systems, top of the range from $1,200 | 3000 | USD per kW | 2021 | ^[2] |
| Cement-plant waste heat recovery units ordered from Kawasaki, more than | 270 | units | – | ^[3] |
| Total power output of installed Kawasaki waste heat recovery units, about | 2880 | MW | – | ^[3] |
| Share of a cement factory's electricity that waste heat recovery can supply, top of the 20 to 40% estimate | 40 | % | – | ^[3] |

as of 2026-11-12. The 8,840 MW covers waste streams above 450°F and comes from a DOE report published in 2016 [2]. The 30 to 50% and the capital cost range are from the April 2021 fact sheet, which gives them no data year [2]. The Kawasaki figures are one maker's own order record, in an undated article [3].

#### Where it is used

The main places and products the technology is found in

- Cement plants, where waste heat from the kiln drives a steam turbine ^[3]
- Petroleum refining and iron and steel, which have the greatest potential in the US study, followed by stone, clay and glass ^[2]
- Steel works, where Rateau's exhaust steam accumulators proved valuable ^[1]
- Incinerators, flared gas and chemical processes, also listed as heat sources ^[2]

as of 2026-11-12

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Installed**
: About 2,880 MW from one maker's cement plant units

**Users**
: Cement, steel and refining plants

**Unit**
: MW

**Note**
: No world total was found. The Kawasaki figure counts only its own units, with orders for more than 270 units in Japan and 14 other countries ^[3].

as of 2026-11-12

#### Sources

1. [Auguste Rateau](https://www.gracesguide.co.uk/Auguste_Rateau) Grace's Guide to British Industrial History
2. [Waste Heat to Power, CHP Technology Fact Sheet Series (DOE/EE-2347)](https://betterbuildingssolutioncenter.energy.gov/sites/default/files/attachments/Waste_Heat_to_Power_Fact_Sheet.pdf) US Department of Energy, 2021
3. [Recovering heat across the globe](https://www.worldcement.com/special-reports/04082023/recovering-heat-across-the-globe/) World Cement (article by Kazuki Ao, Kawasaki Heavy Industries)
4. [William John Macquorn Rankine](https://britannica.com/biography/William-John-Macquorn-Rankine) Encyclopaedia Britannica
5. [Manual of the Steam Engine and other Prime Movers](https://www.britannica.com/topic/Manual-of-the-Steam-Engine-and-other-Prime-Movers) Encyclopaedia Britannica
6. [June 12, 1824: Sadi Carnot Publishes Treatise on Heat Engines](https://aps.org/apsnews/2009/05/sadi-carnot-heat-engines) APS News, American Physical Society, 2009

## Other sections

- [Summary](https://www.materialinsights.org/technologies/e_whr_rankine/index.md)
- [Overview](https://www.materialinsights.org/technologies/e_whr_rankine/overview/index.md)
- [Correlation](https://www.materialinsights.org/technologies/e_whr_rankine/correlation/index.md)
- [Science and thermodynamics](https://www.materialinsights.org/technologies/e_whr_rankine/rc-sci/index.md)
- [Engineering and integration](https://www.materialinsights.org/technologies/e_whr_rankine/rc-eng/index.md)
- [Economics and contracts](https://www.materialinsights.org/technologies/e_whr_rankine/rc-econ/index.md)
- [Impact and additionality](https://www.materialinsights.org/technologies/e_whr_rankine/rc-impact/index.md)
- [What to track](https://www.materialinsights.org/technologies/e_whr_rankine/tracking/index.md)
- [Science](https://www.materialinsights.org/technologies/e_whr_rankine/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/e_whr_rankine/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/e_whr_rankine/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/e_whr_rankine/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/e_whr_rankine/tech-industries/index.md)
- [Relationships](https://www.materialinsights.org/technologies/e_whr_rankine/links/index.md)
