# Electrical discharge machining

Sparks erode hard metal into precise shapes such as moulds and dies.

Source page: https://www.materialinsights.org/technologies/electrical_discharge_machining/

Making things · Tools and machining · No. 496

- Electronic age
- Readiness 9 of 9
- Process
 Making things · Technology

A failed attempt to stop sparks wearing away switch contacts became a way to carve the hardest steel to within microns.

Chart: Illustration: Electrical discharge machining

##### Where it comes from

Chart: Map of where it comes from

In 1943 Boris and Natalia Lazarenko, working in Moscow, saw that sparks under a fluid removed metal in a controlled way. By 1946 the method was patented abroad and entering Soviet factories, and Swiss firms showed production machines in 1954.

##### Three things to know

1. The Lazarenkos found the method in 1943 while trying to stop sparks eroding tungsten contacts.
2. Hardness does not matter: any metal that conducts electricity can be cut, which is why it shapes hardened steel moulds.
3. Computer numerically controlled spark machines appeared in the United States in 1980.

##### The journey

1. 1 **Electrode**A shaped copper or graphite tool, or a moving thin wire
2. 2 **Fluid**Tool and workpiece sit in oil or deionised water
3. 3 **Spark**Voltage pulses make sparks jump the tiny gap in rapid succession
4. 4 **Erosion**Each spark melts and vaporises a speck of metal, flushed away by the fluid
5. 5 **Part**A mould cavity, die or turbine slot in hardened metal

##### Go deeper pick a tab to open it in full

## Other sections

- [Overview](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-industries/index.md)
