# Electrical discharge machining: Overview

Source page: https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

Electrical discharge machining cuts metal with sparks instead of a blade. Because it does not push on the work, it shapes conducting metals whatever their hardness ^[4], such as hardened steel for moulds and dies, and parts for aircraft engines and medical implants ^[3, 4]. It was found in 1943 ^[2], entered Soviet factories from 1946 ^[7], and Japan alone built numerically controlled machines worth 40.3 billion yen in 2024 ^[5].

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

The tool, called an electrode, and the workpiece are both wired to a power supply and held a tiny distance apart in an insulating fluid such as oil or deionised water ^[3, 4]. The supply sends short voltage pulses. Each pulse breaks down the fluid in the gap and a spark jumps across, forming a narrow channel of plasma, hot ionised gas ^[4]. The heat where the spark lands is high enough to vaporise metal ^[4], so each spark leaves a tiny crater. The fluid then flushes the debris away ^[3]. Millions of sparks, steered by the machine's control, copy the electrode's shape into the work. A die-sinking machine uses a shaped copper or graphite electrode; a wire machine cuts outlines with a thin moving wire ^[3, 4].

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Japan's production of numerically controlled EDM machines | 40.3 | billion yen | 2024 | ^[5] |
| Accuracy offered by precision wire machines for stamping tools | 2 | micrometres, less than | 2025 | ^[3] |
| Makers of EDM machine tools in China | 200 | manufacturers, more than | – | ^[1] |
| Countries granting patents on the Lazarenko method | 5 | countries | 1946 | ^[2] |

as of 2026-11-11. The accuracy figure carries 2025, the publication year of the article, not a data year; it is the builder's own claim for its wire machines [3]. The Lazarenko institute page shows no year of any kind for its count of Chinese makers, so that row has none [1]. The Japanese output is the 2024 data year of the 2025 report [5].

#### Where it is used

The main places and products the technology is found in

- Cavities of injection moulds and forging dies
- Punching and stamping tools cut by wire
- Fir-tree slots and turbine discs in aircraft engines
- Fine holes and channels in medical implants
- Tooling for electronic connectors and electric motor laminations

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Made per year**
: Numerically controlled EDM machines worth 40.3 billion yen in Japan ^[5]

**Unit**
: JPY of machines made

**Year**
: 2024

**Note**
: Japan only; no world count of machines was found. China has more than 200 makers of the machines ^[1].

as of 2026-11-11

#### Sources

1. [Boris Lazarenko - Institute of Applied Physics](https://ifa.usm.md/?page_id=40) Institute of Applied Physics, Chisinau, Moldova
2. [ОБ ОТКРЫТИИ И РАЗВИТИИ ЭЛЕКТРОЭРОЗИОННОЙ ОБРАБОТКИ МАТЕРИАЛОВ. К 60-ЛЕТИЮ ОТКРЫТИЯ СПОСОБА](https://eom.usm.md/index.php/journal/article/view/302) B. N. Zolotykh, Elektronnaya Obrabotka Materialov, vol. 39, no. 3 (abstract in English), 2003
3. [Sparks of precision](https://www.grinding.ch/en/united-grinding/motion/motion-magazine/online-edition/news/sparks-of-precision/) UNITED GRINDING Group, Motion magazine (a machine builder's customer magazine), 2025
4. [A review on optimization of machining performances and recent developments in electro discharge machining](https://mfr.edp-open.org/10.1051/mfreview/2018015) B. Nahak and A. Gupta, Manufacturing Review, vol. 6, article 2, 2019
5. [Machine Tool Industry Japan 2025](https://www.jmtba.or.jp/english/wjmtbap/wp-content/uploads/2025/09/MachineTool-Production.pdf) Japan Machine Tool Builders' Association, 2025
6. [Academician Boris Romanovich Lazarenko, the pioneer of the electroerosion machining method (in Russian)](https://eom.ifa.md/m/journal/download/610) M. K. Bologa, Elektronnaya Obrabotka Materialov, vol. 46, no. 6, pp. 127 to 135, 2010

## Other sections

- [Summary](https://www.materialinsights.org/technologies/electrical_discharge_machining/index.md)
- [Science](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-industries/index.md)
