# Electrical discharge machining: Science

Source page: https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Electrostatics (Coulomb's law)](https://www.materialinsights.org/science/coulombs_law/) The voltage across the gap pulls charges through the fluid until it breaks down and a plasma channel forms ^[4], which is the spark that does the cutting.
- [Heat conduction (Fourier's law)](https://www.materialinsights.org/science/heat_conduction/) Each spark heats a spot enough to vaporise it ^[4]; copper electrodes wear less than brass because of their high thermal conductivity and melting point ^[4].

as of 2026-11-11

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1770 | Joseph Priestley | Noticed that a series of electric sparks wears away the surface they strike ^[4] |
| 1943 | Boris and Natalia Lazarenko | Found that sparks in a dielectric fluid remove metal in a controlled way ^[1, 2] |

as of 2026-11-11

#### The science explained

The science behind it explained for a curious reader

Imagine a lightning storm in miniature. The tool and the metal part are the cloud and the ground, a hair's breadth apart, with oil or water between them. Raise the voltage and the fluid suddenly gives way: a thin thread of plasma forms and a spark leaps across ^[4]. Where it lands, the metal is heated so fast that a tiny pool melts and boils off ^[4]. Then the pulse stops, the fluid rushes back, quenches the spot and carries the speck away ^[3]. Each spark removes almost nothing, but a rapid stream of them adds up. Because the cutting is done by heat, not force, the hardness of the metal hardly matters; it only has to conduct electricity ^[4].

as of 2026-11-11

#### Sources

1. [Boris Lazarenko - Institute of Applied Physics](https://ifa.usm.md/?page_id=40) Institute of Applied Physics, Chisinau, Moldova
2. [ОБ ОТКРЫТИИ И РАЗВИТИИ ЭЛЕКТРОЭРОЗИОННОЙ ОБРАБОТКИ МАТЕРИАЛОВ. К 60-ЛЕТИЮ ОТКРЫТИЯ СПОСОБА](https://eom.usm.md/index.php/journal/article/view/302) B. N. Zolotykh, Elektronnaya Obrabotka Materialov, vol. 39, no. 3 (abstract in English), 2003
3. [Sparks of precision](https://www.grinding.ch/en/united-grinding/motion/motion-magazine/online-edition/news/sparks-of-precision/) UNITED GRINDING Group, Motion magazine (a machine builder's customer magazine), 2025
4. [A review on optimization of machining performances and recent developments in electro discharge machining](https://mfr.edp-open.org/10.1051/mfreview/2018015) B. Nahak and A. Gupta, Manufacturing Review, vol. 6, article 2, 2019

## Other sections

- [Summary](https://www.materialinsights.org/technologies/electrical_discharge_machining/index.md)
- [Overview](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/electrical_discharge_machining/tech-industries/index.md)
