# Electroplating: Overview

Source page: https://www.materialinsights.org/technologies/electroplating/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

Electroplating coats a conducting object with a thin layer of another metal. The layer can make it shine, resist rust and wear, or carry current well. Gold and silver go on jewellery and cutlery, and chrome on car parts ^[2]. The process became an industry after the Elkington patent of 1840 ^[1], and since 1997 it has also laid the copper wiring of integrated circuits ^[2].

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

The object is hung in a bath of dissolved salts of the coating metal and wired to the negative side of a direct current supply, a rectifier or battery ^[2]. In the solution the metal atoms are positive ions, so they drift towards the object. At its surface each ion takes up electrons and becomes solid metal ^[2]. A bar of the same metal usually serves as the positive electrode; it dissolves as the current flows and replaces the ions that have been plated out ^[2]. The more charge passed, the thicker the coat, and typical layers are 0.1 to 30 microns ^[2]. The bath's make-up, temperature and current decide whether the deposit is bright, hard or soft.

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Nickel deposited by electroplating worldwide each year | 150,000 | tonnes, at least | – | ^[4] |
| Typical plated layer, thinnest | 0.1 | micrometres | 2002 | ^[2] |
| Typical plated layer, thickest | 30 | micrometres | 2002 | ^[2] |
| Recipes for gold plating gathered from the literature for a 1913 symposium | 193 | recipes | 1913 | ^[1] |

as of 2026-11-11. The Nickel Institute page shows no year at all, neither a data year nor a publication year, so its nickel figure has none [4]. The layer thicknesses carry 2002, the publication year of the encyclopaedia article, not a data year [2].

#### Where it is used

The main places and products the technology is found in

- Gold and silver coats on jewellery, cutlery and utensils
- Chrome and nickel on car parts, taps and fittings
- Zinc and tin coats that keep steel from rusting
- Copper wiring inside integrated circuits
- Thin magnetic layers in the read heads of hard disc drives

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Made per year**
: More than 150,000 tonnes of nickel deposited by electroplating ^[4]

**Unit**
: tonnes of nickel plated

**Note**
: Counts nickel only, the metal for which a world figure was found; the source page shows no year of any kind ^[4]. No world count of plating lines or plated area was found.

as of 2026-11-11

#### Sources

1. [The Beginnings of Gold Electroplating](https://www.electrochem.org/dl/interface/sum/sum13/sum13_p036_038.pdf) J. C. Garcia and T. D. Burleigh, The Electrochemical Society Interface, Summer 2013, 2013
2. [Electroplating](https://knowledge.electrochem.org/encycl/art-e01-electroplat.htm) Mordechay Schlesinger, Electrochemistry Encyclopedia, The Electrochemical Society, 2002
3. [Nickel electroplating](https://www.nickelinstitute.org/about-nickel/plating) Nickel Institute

## Other sections

- [Summary](https://www.materialinsights.org/technologies/electroplating/index.md)
- [Science](https://www.materialinsights.org/technologies/electroplating/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/electroplating/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/electroplating/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/electroplating/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/electroplating/tech-industries/index.md)
