# Flush toilet with water trap: Overview

Source page: https://www.materialinsights.org/technologies/flush_toilet/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

A flush toilet uses a rush of water to carry human waste out of the home and into a sewer or septic tank. A water-filled bend in its outlet stops sewer smells and gases coming back. Harington described one in 1596, and Cumming patented the version with a trap in 1775 ^[1]. Today they are standard in most homes with piped water, yet 3.4 billion people lacked safely managed sanitation in 2024 ^[3].

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

A cistern above or behind the bowl holds a set volume of water. Pressing the handle opens a valve, and the water rushes into the bowl through a rim and a jet. In a siphonic toilet the outlet is a curved pipe that rises before it falls. When the bowl fills fast, water fills the whole pipe and starts a siphon: the falling water on the far side pulls the bowl's contents after it until air breaks the flow. Air pressure on the water in the bowl is what drives the siphon. When the flush ends, fresh water refills the low part of the bend. This standing water, the trap, seals the drain so that sewer gas cannot rise into the room, the job of Cumming's S-pipe ^[1]. A float valve then refills the cistern for the next flush.

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Share of an average US home's indoor water used by toilets | 30 | % | – | ^[2] |
| Water per flush of older, inefficient toilets, up to | 6 | US gallons | – | ^[2] |
| Current US federal maximum per flush | 1.6 | US gallons | – | ^[2] |
| Water per flush of WaterSense toilets, at most | 1.28 | US gallons | – | ^[2] |
| People without safely managed sanitation | 3.4 | billion people | 2024 | ^[3] |

as of 2026-11-11. EPA gives the 30% as nearly 30% and dates none of its figures. WHO's sanitation counts include all toilet types, not only flush toilets.

#### Where it is used

The main places and products the technology is found in

- Homes with piped water, connected to sewers or septic tanks
- Public toilets, first shown at the Great Exhibition by Jennings ^[1]
- Offices, schools, hospitals and other buildings
- Trains, ships and aircraft, often with vacuum flushing

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Users**
: 4.8 billion people (58%) used safely managed sanitation in 2024 ^[3]

**Unit**
: people

**Year**
: 2024

**Note**
: Counts safe sanitation of all kinds, including pit latrines; no opened source counts flush toilets in use.

as of 2026-11-11

#### Sources

1. [A flushing story](https://blog.sciencemuseum.org.uk/a-flushing-story/) Science Museum Group (blog, Kerry Grist), 2020
2. [Residential Toilets](https://www.epa.gov/watersense/residential-toilets) US Environmental Protection Agency (WaterSense)
3. [Sanitation (fact sheet)](https://www.who.int/en/news-room/fact-sheets/detail/sanitation) World Health Organization, 2026

## Other sections

- [Summary](https://www.materialinsights.org/technologies/flush_toilet/index.md)
- [Science](https://www.materialinsights.org/technologies/flush_toilet/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/flush_toilet/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/flush_toilet/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/flush_toilet/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/flush_toilet/tech-industries/index.md)
