# High-pressure polyethylene process

Ethylene gas squeezed at very high pressure links into polyethylene, now the most used plastic.

Source page: https://www.materialinsights.org/technologies/high_pressure_polyethylene/

Making materials · Polymers · No. 24

- Electrical and chemical age
- Readiness 9 of 9
- Process
 Making materials · Technology

Polythene was found by accident in 1933, when a high-pressure experiment lost pressure and left a mystery waxy solid in the vessel.

Chart: Illustration: High-pressure polyethylene process

##### Where it comes from

Chart: Map of where it comes from

ICI chemists Reginald Gibson and Eric Fawcett were testing gases at very high pressure in 1933. Their ethylene run left a waxy solid; two years later colleagues found the trace of oxygen that made it repeatable.

##### Three things to know

1. The 1933 result could not be repeated until December 1935, when chemists found that a trace of oxygen starts the reaction.
2. Almost all of the 4,000 t of polyethylene made from 1939 to 1945 insulated radar cables.
3. Today's tubular reactors run at 2,500 to 3,200 bar, and high-conversion designs turn 30 to 36% of the ethylene into polymer on each pass.

##### The journey

1. 1 **Ethylene**A gas cracked from oil or gas liquids
2. 2 **Compression**Squeezed to thousands of atmospheres
3. 3 **Initiator**A trace of oxygen or a peroxide starts the chains
4. 4 **Reactor**A long tube or a stirred autoclave; part of the gas turns to polymer
5. 5 **Pellets**The melt is separated, cooled and cut into pellets
6. 6 **Products**Film, cable coating, foam
 Covered in [Matter at the atomic scale: bonds, reactions and process engineeringEngineering](https://www.materialinsights.org/learn/engineering/matter-and-process/)

##### Go deeper pick a tab to open it in full

## Other sections

- [Overview](https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-industries/index.md)
