# High-pressure polyethylene process: Overview

Source page: https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

The high-pressure process turns ethylene gas into low-density polyethylene, a soft, tough and transparent plastic. ICI chemists discovered it in 1933 ^[1], and the first plant started in 1939 ^[1]. During the Second World War it insulated radar cables ^[1]. Today it makes film, foam and cable coatings ^[6].

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

Ethylene is a small gas molecule with a double bond that can open and join to others. In the process the gas is compressed to very high pressure, up to about 350 MPa ^[3], and heated. A tiny amount of oxygen or another initiator creates free radicals, molecules with an unpaired electron ^[1]^[3]. Each radical opens an ethylene double bond and passes the unpaired electron on, so a chain grows thousands of units long. Because the radicals also bite into finished chains, the polymer gets many side branches ^[3]. The branches stop the chains packing tightly, which makes the plastic less dense, softer and clearer than linear polyethylene. Only part of the ethylene reacts on each pass; the rest is recycled ^[6].

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Pressure of the discovery experiment | 1900 | atm | 1933 | ^[1] |
| Capacity of the first full-scale plant | 100 | t per year | 1939 | ^[1] |
| Share of world LDPE capacity in tubular reactors | 70 | % | 2025 | ^[6] |
| Conversion per pass, high-conversion tubular reactor, upper end | 36 | % | 2025 | ^[6] |
| World plastics production, all polymers | 430.9 | million t | 2024 | ^[4] |

as of 2026-11-11. For the tubular-reactor rows, 2025 is the publication year of the industry review, not a data year [6].

#### Where it is used

The main places and products the technology is found in

- Packaging and agricultural film ^[6]
- Insulation for wires and cables, first for wartime radar ^[1]^[6]
- Foam ^[6]
- Coatings and moulded goods

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Installed**
: Tubular reactors hold 70% of world LDPE capacity; a tubular plant typically makes 400,000 to 500,000 t a year ^[6]

**Unit**
: t per year

**Note**
: No open source opened gives total world LDPE output; all plastics together came to 430.9 million t in 2024 ^[4].

as of 2026-11-11

#### Sources

1. [Dermot Manning and colleagues at ICI - Plastic Fantastic](https://www.thechemicalengineer.com/features/cewctw-dermot-manning-and-colleagues-at-ici-plastic-fantastic/) The Chemical Engineer, IChemE (Claudia Flavell-While), 2011
2. [Low-density polyethylene](https://www.britannica.com/science/low-density-polyethylene) Encyclopaedia Britannica
3. [Plastics the Fast Facts 2025](https://plasticseurope.org/de/wp-content/uploads/sites/3/2025/10/PE_TheFacts_25_digital-A4.pdf) Plastics Europe (October 2025), 2025
4. [Overview on low-density polyethylene manufacturing technologies](https://read.nxtbook.com/gulf_energy_information/hydrocarbon_processing/may_2025/petrochemical_technologies_mahalingam_saudi_aramco.html) Hydrocarbon Processing, May 2025 (B. Mahalingam and M. Ghodasara, Saudi Aramco), 2025

## Other sections

- [Summary](https://www.materialinsights.org/technologies/high_pressure_polyethylene/index.md)
- [Science](https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/high_pressure_polyethylene/tech-industries/index.md)
