# Injection moulding

Molten plastic is forced into a steel mould, making identical parts in seconds.

Source page: https://www.materialinsights.org/technologies/injection_moulding/

Making things · Forming and joining · No. 333

- Electrical and chemical age
- Readiness 9 of 9
- Process
 Making things · Technology

Patented in 1872 to shape celluloid, injection moulding now turns out Lego bricks, cutlery and medical parts, small ones several a minute.

Chart: Illustration: Injection moulding

##### Where it comes from

Chart: Map of where it comes from

John and Isaiah Hyatt, celluloid makers in Albany, New York, patented a heated cylinder that forced the softened plastic through a nozzle into a mould in 1872. The method only became a commercial success with cellulose acetate, after 1928.

##### Three things to know

1. The Hyatt brothers' 1872 patent used a plunger in a heated cylinder to force celluloid through a nozzle into a mould.
2. James Hendry replaced the plunger with a turning screw in 1946, which gave better control of injection speed and part quality.
3. The reciprocating screw, which both melts and injects, was developed at Egan Machinery in 1952 and patented in 1956.

##### The journey

1. 1 **Polymer**Oil or gas is made into plastic pellets
2. 2 **Melting**A turning screw in a heated barrel melts the pellets
3. 3 **Injection**The screw pushes forward like a plunger and fills the mould
4. 4 **Cooling**The plastic sets against the cold steel walls
5. 5 **Ejection**The mould opens and pins push the finished part out
 Covered in [The economics of a chemical plant: costs, prices and profitChemicals](https://www.materialinsights.org/learn/chemicals/plant-economics-costs-and-profit/)[From building blocks to plastics, fibres and detergentsChemicals](https://www.materialinsights.org/learn/chemicals/building-blocks-to-polymers/)

##### Go deeper pick a tab to open it in full

## Other sections

- [Overview](https://www.materialinsights.org/technologies/injection_moulding/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/injection_moulding/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/injection_moulding/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/injection_moulding/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/injection_moulding/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/injection_moulding/tech-industries/index.md)
