# Injection moulding: Science

Source page: https://www.materialinsights.org/technologies/injection_moulding/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Macromolecules (polymer theory)](https://www.materialinsights.org/science/polymer_macromolecules/) Thermoplastics are long chain molecules that soften when heated and set again on cooling, which lets a melt fill a mould and keep its shape.
 Limited by

- [Heat conduction (Fourier's law)](https://www.materialinsights.org/science/heat_conduction/) The part can leave the mould only when its heat has flowed into the cold metal, so cooling sets much of the length of each cycle.

as of 2026-11-11

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1870 | John W. Hyatt and Isaiah Hyatt | Patented the process for making celluloid from pyroxyline, the plastic their 1872 machine was built to shape ^[1] |
| 1922 | Hermann Staudinger and J. Fritschi | Proposed that polymers are giant molecules held by ordinary chemical bonds ^[7] |
| 1933 | Eric Fawcett and Reginald Gibson, ICI | Found polyethylene, now one of the commonest moulding plastics, as a waxy solid in a high-pressure experiment ^[3, 8] |

as of 2026-11-11

#### The science explained

The science behind it explained for a curious reader

Picture a bowl of cooked spaghetti. Cold, the strands cling and the mass holds its shape; warm and stirred, they slide past each other and the mass flows. A thermoplastic is made of very long chain molecules, as Staudinger argued in 1922 ^[7], and it behaves the same way. Heat lets the chains slide, so the melt can be pushed down a narrow channel into every corner of a mould. Inside the cold mould the chains lose that energy and lock together again, so the plastic keeps the shape of the cavity. The catch is time: heat has to flow out through the steel walls, and thick parts take longer to set. That is why designers keep walls thin and even.

as of 2026-11-11

#### Sources

1. [Improvement in Processes and Apparatus for Manufacturing Pyroxyline (US patent 133,229)](https://patents.google.com/patent/US133229) Google Patents, 1872
2. [Injection moulding](https://www.modip.ac.uk/plastics/manufacturing-processes/injection-moulding) Museum of Design in Plastics, Arts University Bournemouth
3. [Hermann Staudinger](https://www.britannica.com/print/article/564304) Encyclopaedia Britannica
4. [Dermot Manning and colleagues at ICI - Plastic Fantastic](https://www.thechemicalengineer.com/features/cewctw-dermot-manning-and-colleagues-at-ici-plastic-fantastic/) The Chemical Engineer, IChemE (Claudia Flavell-While), 2011

## Other sections

- [Summary](https://www.materialinsights.org/technologies/injection_moulding/index.md)
- [Overview](https://www.materialinsights.org/technologies/injection_moulding/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/injection_moulding/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/injection_moulding/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/injection_moulding/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/injection_moulding/tech-industries/index.md)
