# Lathe

Work spun against a cutting tool is shaped into round, true forms.

Source page: https://www.materialinsights.org/technologies/lathe/

Making things · Tools and machining · No. 320

- Ancient
- Readiness 9 of 9
- System
 Making things · Technology

Spin the work, hold the tool still: the oldest machine tool still makes more than a quarter of Japan's machine tool output by value.

Chart: Illustration: Lathe

##### Where it comes from

Chart: Map of where it comes from

Woodworkers learnt to spin a piece of wood with a cord and bow and hold a chisel against it. A Mycenaean dish may be turned work of 1400 to 1100 BC; an Etruscan bowl of about 700 BC is clearer.

##### Three things to know

1. The earliest possible lathe-turned object is a wooden dish from Mycenae dated 1400 to 1100 BC, though the evidence is weak.
2. Henry Maudslay's lathe of about 1800 used a lead screw and slide rest to cut accurate screw threads, which had been made by hand.
3. In 2024 turning machines were 26.9% of Japan's machine tool production by value, and numerically controlled ones alone 24.9%.

##### The journey

1. 1 **Mount**The workpiece is gripped in a chuck or held between centres
2. 2 **Spin**A motor, once a bow, pole or treadle, turns the work
3. 3 **Cut**A hard tool is pressed against the spinning surface
4. 4 **Feed**The tool moves along and across the work to shape it
5. 5 **Part**A round, true shaft, bowl, bolt or bore comes off the machine

##### Go deeper pick a tab to open it in full

## Other sections

- [Overview](https://www.materialinsights.org/technologies/lathe/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/lathe/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/lathe/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/lathe/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/lathe/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/lathe/tech-industries/index.md)
