# Lathe: Energy footprint

Source page: https://www.materialinsights.org/technologies/lathe/tech-energy-footprint/

#### Energy in use

The energy it uses or converts while it works, and how efficiently

**Consumption**
: Electricity for the spindle motor, feed drives, coolant pumps and controls; once muscle power

**Conversion**
: The motor's work becomes cutting work, nearly all of which ends as heat in the chip, tool and coolant

**Note**
: No source opened gives energy per part.

as of 2026-11-10

#### Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back
 Consumes

- [El Electricity](https://www.materialinsights.org/energy/electricity/) Modern lathes are driven by electric spindle and feed motors.
- [Mot Electric motors and drives](https://www.materialinsights.org/technologies/e_motors/) Each lathe carries electric motors for the spindle and the slides.
- [Mu Muscle power](https://www.materialinsights.org/energy/e_muscle/) Bow, pole and treadle lathes, used for most of the lathe's history, were driven by the turner's arms and legs ^[1].

as of 2026-11-10

#### Sources

1. [A brief history of woodturning](https://turningtools.co.uk.wgo.ca/history2/history-turning2.html) The Woodturner's Workshop (Brian Clifford), hosted by the Woodturners' Guild of Ontario

## Other sections

- [Summary](https://www.materialinsights.org/technologies/lathe/index.md)
- [Overview](https://www.materialinsights.org/technologies/lathe/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/lathe/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/lathe/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/lathe/tech-materials/index.md)
- [Industries](https://www.materialinsights.org/technologies/lathe/tech-industries/index.md)
