# Metal casting (lost wax): Energy footprint

Source page: https://www.materialinsights.org/technologies/lost_wax_casting/tech-energy-footprint/

#### Energy in use

The energy it uses or converts while it works, and how efficiently

**Consumption**
: Heat to melt the metal and to fire or burn out the mould, from fuel or electric furnaces

**Conversion**
: Fuel or electricity becomes heat in a furnace; the metal gives the heat back as it sets in the mould

**Note**
: Melting is the largest energy use in a foundry; no source gives a figure per tonne for this node.

as of 2026-11-10

#### Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back
 Consumes

- [Ht Heat](https://www.materialinsights.org/energy/heat/) Every casting starts with melting metal, and lost-wax moulds are also heated to drive out the wax.
- [El Electricity](https://www.materialinsights.org/energy/electricity/) Many foundries melt metal in electric induction or arc furnaces.
- [Blr Boilers, furnaces and stoves](https://www.materialinsights.org/technologies/e_combustion_heat/) Gas- and coke-fired furnaces burn fuel to melt metal and fire moulds.

as of 2026-11-10

## Other sections

- [Summary](https://www.materialinsights.org/technologies/lost_wax_casting/index.md)
- [Overview](https://www.materialinsights.org/technologies/lost_wax_casting/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/lost_wax_casting/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/lost_wax_casting/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/lost_wax_casting/tech-materials/index.md)
- [Industries](https://www.materialinsights.org/technologies/lost_wax_casting/tech-industries/index.md)
