# Mechanical reaper: Overview

Source page: https://www.materialinsights.org/technologies/mechanical_reaper/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

A mechanical reaper cuts a standing grain crop, the slowest and most labour-hungry part of the harvest. With a sickle or scythe a farmer could cut only about three acres a day ^[1]. Patrick Bell's horse-pushed reaper of 1827 to 1828 averaged about an acre an hour ^[4]. McCormick began selling reapers in 1841 ^[2], and by 1855 American wheat farmers commonly used them ^[1].

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

A reaper is pulled or pushed along the edge of the standing crop. A turning reel with wooden paddles bends the stalks towards the cutter and holds them steady ^[4]. Close to the ground, a cutter bar shears the stalks: a row of blades slides side to side against fixed guards, like the blades of scissors ^[4]. On early machines a wheel running on the ground drove the reel and the knife through gears and a crank, so the faster the horses walked, the faster it cut. The cut grain falls back onto a platform. A worker raked it off at first, and by the mid-1860s a self-raking mechanism cleared it for the binders following behind ^[1]. Later reaper-binders tied the sheaves themselves, and modern small reapers use a small engine and a vertical conveyor ^[5].

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Area a farmer could cut by hand with a sickle or scythe | 3 | acres per day | – | ^[1] |
| Average cut of Bell's reaper | 1 | acre per hour | – | ^[4] |
| McCormick reapers sold in a year | 4000 | machines or more | 1856 | ^[2] |
| Capacity of one small engine-driven paddy reaper (TNAU design) | 0.125 | ha per hour | – | ^[5] |

as of 2026-11-11. The hand figure is a general one for the time before reapers [1]; the Bell figure is for the machine of 1827 to 1828, and the museum gives no year for the measurement [4]; the TNAU figure is for one 3 hp university design, not for reapers in general [5].

#### Where it is used

The main places and products the technology is found in

- Wheat, oats and barley harvests in Britain and North America ^[1, 4]
- Prairie wheat farms of the American Midwest
- Paddy harvests on small farms in India ^[5]
- Crops cut for later threshing, where combines are too large or too costly

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Made per year**
: No current world figure was found

**Unit**
: machines

**Note**
: The only sales figure found is historical: McCormick alone sold more than 4,000 a year by 1856 ^[2].

as of 2026-11-11

#### Sources

1. [Agricultural Machinery (R. Douglas Hurt)](https://www.encyclopedia.com/history/dictionaries-thesauruses-pictures-and-press-releases/agricultural-machinery) Dictionary of American History (Gale), on Encyclopedia.com
2. [Cyrus McCormick](https://www.britannica.com/biography/Cyrus-McCormick) Encyclopaedia Britannica
3. [Patrick Bell's original reaping machine](https://collection.sciencemuseumgroup.org.uk/objects/co38745/patrick-bells-original-reaping-machine) Science Museum Group Collection
4. [Farm Machinery: Harvesting and Threshing Machineries (Self Propelled Vertical Conveyor Reaper)](https://agritech.tnau.ac.in/agricultural_engineering/agriengg_fmp_harvesting_sp_verti_convey_reaper.html) TNAU Agritech Portal, Tamil Nadu Agricultural University

## Other sections

- [Summary](https://www.materialinsights.org/technologies/mechanical_reaper/index.md)
- [Science](https://www.materialinsights.org/technologies/mechanical_reaper/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/mechanical_reaper/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/mechanical_reaper/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/mechanical_reaper/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/mechanical_reaper/tech-industries/index.md)
