# Magnetic resonance imaging: Energy footprint

Source page: https://www.materialinsights.org/technologies/mri_scanner/tech-energy-footprint/

#### Energy in use

The energy it uses or converts while it works, and how efficiently

**Consumption**
: Mains electricity for the gradient coils, radio amplifiers, the helium cooling system and computers

**Conversion**
: Electrical energy to radio pulses and magnetic field changes; the main superconducting field needs no power once set up

**Note**
: No source gave energy per scan; cryogenic cooling runs all day, scanning or not.

as of 2026-11-11

#### Energy links

The energy sources and technologies it uses, holds, converts, loses or gets back
 Consumes

- [El Electricity](https://www.materialinsights.org/energy/electricity/) Gradient amplifiers, radio transmitters, cryocoolers and computers run on mains electricity.
 Loses

- [Ht Heat](https://www.materialinsights.org/energy/heat/) Gradient coils and amplifiers turn much of their power into heat, removed by water cooling.

as of 2026-11-11

## Other sections

- [Summary](https://www.materialinsights.org/technologies/mri_scanner/index.md)
- [Overview](https://www.materialinsights.org/technologies/mri_scanner/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/mri_scanner/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/mri_scanner/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/mri_scanner/tech-materials/index.md)
- [Industries](https://www.materialinsights.org/technologies/mri_scanner/tech-industries/index.md)
