# Open-hearth steelmaking

A regenerative furnace melts pig iron and scrap slowly, giving steel of controlled quality.

Source page: https://www.materialinsights.org/technologies/open_hearth_steelmaking/

Making materials · Metals · No. 394

- Steam and steel
- Readiness 9 of 9
- Process
 Making materials · Technology

A furnace that recycled its own exhaust heat made nine tenths of British and American steel until 1950.

Chart: Illustration: Open-hearth steelmaking

##### Where it comes from

Chart: Map of where it comes from

Friedrich and William Siemens built a furnace that stored exhaust heat in brickwork to preheat the incoming air. In 1864 Pierre and Emile Martin used one to make steel in France.

##### Three things to know

1. The open hearth could melt any mix of molten pig iron and cold scrap, so steelworks could melt scrap as well as fresh iron.
2. A heat took 12 to 18 hours, long enough for steelmakers to test the metal and adjust it before tapping.
3. Oxygen steelmaking replaced it from about 1960; Russia shut its last open hearth in 2018 and India's SAIL in 2020.

##### The journey

1. 1 **Charge**Molten pig iron, cold scrap, iron ore and limestone go onto a shallow hearth
2. 2 **Regenerators**Brick chambers heated by the exhaust warm the incoming air and gas
3. 3 **Melting**The hot flame sweeps over the charge and melts it
4. 4 **Refining**Over many hours oxygen burns out carbon and limestone takes up impurities as slag
5. 5 **Tapping**Steel is sampled until it is right, then poured into ladles

##### Go deeper pick a tab to open it in full

## Other sections

- [Overview](https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-industries/index.md)
