# Open-hearth steelmaking: Science

Source page: https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Combustion chemistry](https://www.materialinsights.org/science/combustion_chemistry/) Oxygen in contact with the molten iron burns its extra carbon to carbon monoxide, which is how iron becomes steel ^[3].
- [Thermodynamics of ore reduction (Ellingham diagram)](https://www.materialinsights.org/science/reduction_thermodynamics/) Carbon and other impurities take oxygen more readily than iron, so iron ore added to the charge gives up its oxygen to burn them out ^[1]^[3].
- [Heat conduction (Fourier's law)](https://www.materialinsights.org/science/heat_conduction/) The regenerator bricks soak up heat from the exhaust and pass it to the incoming air and gas when the flow is reversed ^[3]^[8].

as of 2026-11-12

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1777 | Antoine Lavoisier | Combustion explained as combining with oxygen, replacing the phlogiston theory ^[10] |
| 1786 | Louis Bernard Guyton de Morveau; independently Gaspard Monge, Alexandre Vandermonde and Claude Berthollet | Showed that cast iron, wrought iron and steel differ only in their carbon content ^[12] |
| 1875 | Sidney Gilchrist Thomas | Worked out how phosphorus could be removed from iron, which led to basic linings for Bessemer and open-hearth steel ^[11] |

as of 2026-11-12

#### The science explained

The science behind it explained for a curious reader

Picture two brick chambers, one at each end of the furnace. Hot exhaust gas leaves through the left chamber and heats its bricks. After a while the flow is switched: cold air and fuel gas now come in through the hot left chamber, pick up the stored heat and burn with a much hotter flame, while the exhaust heats the right chamber. Switching back and forth keeps both chambers working ^[3]. The Siemens brothers patented the idea in 1856 and 1861 ^[8]. Preheated air raises the flame temperature ^[1], and it was this gain that made it possible to keep steel molten on an open hearth, where oxygen slowly burns out carbon ^[3].

as of 2026-11-12

#### Sources

1. [open-hearth process](https://www.britannica.com/print/article/429666) Encyclopaedia Britannica
2. [Wikipedia: Open-hearth furnace](https://en.wikipedia.org/wiki/Open-hearth_furnace)
3. [Open Hearth Furnace](https://www.globalinch.org/glossary/open-hearth-furnace/) Global InCH, Encyclopedia of Intangible Cultural Heritage, 2018
4. [The Chemical Revolution: Antoine-Laurent Lavoisier (International Historic Chemical Landmark booklet)](https://inchemistry.acs.org/content/dam/acsorg/education/whatischemistry/landmarks/lavoisier/antoine-laurent-lavoisier-commemorative-booklet.pdf) American Chemical Society, 1999
5. [Thomas, Sidney Gilchrist](https://www.encyclopedia.com/science/dictionaries-thesauruses-pictures-and-press-releases/thomas-sidney-gilchrist) Complete Dictionary of Scientific Biography (Harold Dorn), via Encyclopedia.com
6. [Guyton de Morveau, Louis Bernard](https://encyclopedia.com/science/dictionaries-thesauruses-pictures-and-press-releases/guyton-de-morveau-louis-bernard) Complete Dictionary of Scientific Biography (W. A. Smeaton), via Encyclopedia.com

## Other sections

- [Summary](https://www.materialinsights.org/technologies/open_hearth_steelmaking/index.md)
- [Overview](https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/open_hearth_steelmaking/tech-industries/index.md)
