# Large masonry dome: Overview

Source page: https://www.materialinsights.org/technologies/pendentive_dome/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

A large masonry dome roofs a wide hall with no columns inside, using only materials that are strong when squeezed. Romans built the first very large ones in concrete, culminating in the 43.2 m Pantheon of about 118 to 128 CE ^[1]. Pendentives later let domes rise over square plans, as at Hagia Sophia, finished in 537 ^[2]. Great domes crown churches, mosques and public buildings worldwide.

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

A dome is an arch turned about its vertical axis. Its weight flows down through the shell along the curves from the crown to the base. Masonry carries this well because the shell is squeezed, not stretched. Near the base, though, the shell tends to spread outwards, so the rings there are pulled apart and cracks open along the curves. Builders resist this with thick walls or buttresses, heavy loading at the base, or iron chains around it. A dome needs a round base; to place one over a square room, builders fill the four upper corners with pendentives, curved triangles of masonry that turn the square into a circle ^[2]. The load then runs down the pendentives to four piers. During building, timber centring usually holds each course until the ring is complete ^[1], though Brunelleschi built Florence's dome without it ^[3].

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Diameter of the Pantheon dome, Rome | 43.2 | m | 128 | ^[1] |
| Average thickness of the Pantheon's concrete dome | 1.5 | m | 128 | ^[1] |
| Span of Hagia Sophia's central dome, Istanbul | 32.6 | m | 537 | ^[1] |
| Estimated weight of Florence Cathedral's dome | 37,000 | t | 1436 | ^[3] |

as of 2026-11-11. Years are the end of each building period given by the sources: about 118 to 128 for the Pantheon [1], 532 to 537 for Hagia Sophia [1] and 1420 to 1436 for Florence [3].

#### Where it is used

The main places and products the technology is found in

- Roman temples, baths and tombs
- Byzantine and Orthodox churches
- Mosques and mausoleums across the Islamic world
- Renaissance and Baroque cathedrals and churches
- Capitols, libraries and other public buildings

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Installed**
: Thousands of historic domed churches, mosques and public buildings; the Pantheon and Hagia Sophia still stand

**Note**
: No opened source counts large masonry domes; new ones are rare, as steel and reinforced concrete took over.

as of 2026-11-11

#### Sources

1. [Building construction: Roman achievements](https://www.britannica.com/technology/construction/Roman-achievements) Encyclopaedia Britannica
2. [Pendentive](https://www.britannica.com/print/article/449698) Encyclopaedia Britannica
3. [The Dome of Santa Maria del Fiore](https://brunelleschi.imss.fi.it/itineraries/place/TheDomeOfSantaMariaFiore.html) Museo Galileo, Florence

## Other sections

- [Summary](https://www.materialinsights.org/technologies/pendentive_dome/index.md)
- [Science](https://www.materialinsights.org/technologies/pendentive_dome/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/pendentive_dome/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/pendentive_dome/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/pendentive_dome/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/pendentive_dome/tech-industries/index.md)
