# Pneumatic tyre: Overview

Source page: https://www.materialinsights.org/technologies/pneumatic_tyre/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

A pneumatic tyre is a rubber casing filled with compressed air that fits round a wheel. It cushions the vehicle from bumps and grips the road, which made fast bicycles, cars and lorries practical. It was invented in 1845 and made practical by Dunlop in 1888 ^[1]. Today about a billion tyres reach the end of their life each year ^[3].

as of 2026-11-10

#### How it works

The working principle in plain words, step by step

The air inside, not the rubber, carries most of the load. Pumped in under pressure, it pushes outward on the casing, which is held in shape by layers of strong cords. Where the tyre meets the road it flattens into a small patch. The vehicle's weight is balanced by the air pressure acting over that patch, so a softer tyre spreads into a bigger patch. When the wheel hits a bump, the air squeezes and springs back, so the jolt is absorbed instead of passing into the vehicle. The rubber tread grips the road by friction. In a radial tyre the cords run straight across from rim to rim, under a belt of steel; this lets the tread stay flat on the road and the sidewall flex, which gives about twice the service life of a cross-ply tyre and cuts energy loss ^[2].

as of 2026-11-10

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Source |
|---|---|---|---|
| Tyres reaching the end of their life each year, about | 1 | billion tyres | ^[3] |
| End-of-life tyres generated each year worldwide, about | 25,000 | kt | ^[3] |
| Share of end-of-life tyres recovered in 51 countries studied, about | 67 | % | ^[3] |
| Share of natural rubber produced that the tyre industry absorbs, about | 76 | % | ^[4] |

as of 2026-11-10. The end-of-life figures are from the Tire Industry Project fact sheet, which shows no date of its own and draws on the report End-of-Life Tires, A Global State of Knowledge (2017), so no year is given [3]; the ETRMA page shows no date for its shares [4].

#### Where it is used

The main places and products the technology is found in

- Cars, vans and motorcycles
- Lorries and buses
- Bicycles
- Aircraft landing gear
- Tractors and earth-moving machines

as of 2026-11-10

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Made per year**
: No world production figure found; about 1 billion tyres reach the end of their life each year ^[3]

**Unit**
: tyres

**Note**
: End-of-life tyres are used as a guide to annual use, since most tyres made replace worn ones; the source gives no year beyond its 2017 report ^[3].

as of 2026-11-10

#### Sources

1. [News Story](https://www.nms.ac.uk/discover-catalogue/dunlop-tyre-air-apparent) National Museums Scotland, untitled news story on Thomson and Dunlop; the page shows only the label 'News Story'
2. [The triumph of the radial tyre](https://news.michelin.co.uk/articles/the-triumph-of-the-radial-tyre) Michelin UK newsroom, 2020
3. [TIP: End-of-Life Tires](https://docs.wbcsd.org/2018/02/ELT_Fact_Sheet.pdf) World Business Council for Sustainable Development, Tire Industry Project
4. [Natural Rubber Supply Chain](https://www.etrma.org/?p=6168) European Tyre and Rubber Manufacturers' Association (ETRMA)

## Other sections

- [Summary](https://www.materialinsights.org/technologies/pneumatic_tyre/index.md)
- [Science](https://www.materialinsights.org/technologies/pneumatic_tyre/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/pneumatic_tyre/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/pneumatic_tyre/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/pneumatic_tyre/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/pneumatic_tyre/tech-industries/index.md)
