# Porcelain: Science

Source page: https://www.materialinsights.org/technologies/porcelain/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Combustion chemistry](https://www.materialinsights.org/science/combustion_chemistry/) Porcelain needs kilns burning fuel hot enough to fire it above 1,200 to 1,300 °C ^[1].

as of 2026-11-11

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1709 | Johann Friedrich Böttger, Dresden | Found the materials needed to make white hard-paste porcelain in Europe ^[2] |
| 1916 | A. A. Klein, Bureau of Standards | Showed under the microscope how firing breaks down the clay into new mineral matter and turns open pores into sealed ones ^[3] |
| 2024 | Ruofei Zong and colleagues | Showed that late sixth-century Xing kiln porcelain was fired above 1,200 °C, some of it near 1,300 °C ^[5] |

as of 2026-11-11

#### The science explained

The science behind it explained for a curious reader

Picture a jar of sand with a little sugar mixed in. Heat it until the sugar melts and it runs between the grains, then let it cool: the grains are now glued into a solid with few gaps. Porcelain works the same way. In the kiln, feldspar melts into a glass that flows between the grains of quartz and clay, and the clay itself breaks down into new mineral matter ^[3]. As the temperature rises, the open, connected pores shrink and the few that remain are sealed ^[3], so the finished piece does not soak up water. That glassy, closed structure is why porcelain is hard and dense. It needs a lot of heat: true porcelain is fired above 1,200 to 1,300 °C ^[1].

as of 2026-11-11

#### Sources

1. [The Invention of Porcelain](https://chineseceramics.gardinermuseum.on.ca/story/invention-of-porcelain/) Gardiner Museum, Toronto
2. [German and Austrian Porcelain in the Eighteenth Century (Jeffrey H. Munger), Heilbrunn Timeline of Art History](https://www.metmuseum.org/essays/german-and-austrian-porcelain-in-the-eighteenth-century) The Metropolitan Museum of Art, 2003
3. [Constitution and Microstructure of Porcelain (A. A. Klein), Technologic Paper No. 80](https://nvlpubs.nist.gov/nistpubs/nbstechnologic/nbstechnologicpaperT80.pdf) Bureau of Standards (now NIST), 1916
4. [Researchers explore raw materials and firing technology for porcelain from late sixth-century Xing kiln (Zhang Nannan; on Zong et al., Archaeometry 2024, doi:10.1111/arcm.12969)](https://phys.org/news/2024-05-explore-raw-materials-technology-porcelain.pdf) Phys.org, 2024

## Other sections

- [Summary](https://www.materialinsights.org/technologies/porcelain/index.md)
- [Overview](https://www.materialinsights.org/technologies/porcelain/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/porcelain/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/porcelain/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/porcelain/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/porcelain/tech-industries/index.md)
