# Portland cement: Science

Source page: https://www.materialinsights.org/technologies/portland_cement/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Hydraulic setting of lime and cement](https://www.materialinsights.org/science/hydraulic_setting/) Calcium silicates react with water into solid hydrates, so the cement hardens by chemistry and also under water ^[5].
- [Combustion chemistry](https://www.materialinsights.org/science/combustion_chemistry/) Burning fuel heats the kiln to about 1,450 °C, and fuel causes about 30 to 40% of cement's CO2 ^[4].
 Limited by

- [Chemical equilibrium (Le Chatelier's principle)](https://www.materialinsights.org/science/chemical_equilibrium/) Heating limestone splits it into lime and carbon dioxide, so about 50 to 60% of the CO2 comes from the rock itself ^[4].

as of 2026-11-10

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1756 | John Smeaton | Working on the Eddystone lighthouse from 1756, found that clay in limestone is the sign of a lime that sets under water ^[2] |
| 1818 | Louis Vicat | Summarised how to make hydraulic lime by controlling the proportions of lime and clay ^[2] |
| 1887 | Henry Le Chatelier | Doctoral thesis on the constitution of hydraulic mortars, explaining setting as crystals growing from solution ^[5] |

as of 2026-11-10

#### Physical limits

The limits nature sets, today's best and how far there is still to go

| Limit | Unit | Best today | Gap |
|---|---|---|---|
| CO2 released by heating limestone, fixed by the chemistry of calcination | % of cement CO2 | About 50 to 60% of cement emissions come from calcination ^[4] | Cannot be cut by cleaner fuel; only less clinker, other binders or carbon capture reduce it |

as of 2026-11-10

#### The science explained

The science behind it explained for a curious reader

Picture cement as a bag of tiny, thirsty crystals. In the kiln, lime from limestone joins with silica from clay or sand into calcium silicates, compounds that do not exist in that form in nature and are eager to react with water. When water is added, they dissolve a little and new solids grow from the solution: a fine gel and needle-like crystals that interlock and glue the sand and stones together, as Le Chatelier showed in 1887 ^[5]. Because the hardening is a reaction, not drying, concrete sets under water and keeps gaining strength for weeks. Smeaton had found the clue in the 1750s: limestone with clay in it gave a lime that set under water ^[2].

as of 2026-11-10

#### Sources

1. [Hydraulic Cement: Lost and Found (Tim Palucka, MRS Bulletin historical note)](https://link.springer.com/content/pdf/10.1557/mrs2001.199.pdf) Springer Nature (Materials Research Society), 2001
2. [Decarbonizing Cement (version of 16 July 2026)](https://business.columbia.edu/sites/default/files-efs/imce-uploads/CKI/Documents/Cement/CKI%20Cement-260716.pdf) Columbia Business School, Climate Knowledge Initiative (Gernot Wagner et al.), 2026
3. [Le Châtelier, Henry Louis](https://encyclopedia.com/science/dictionaries-thesauruses-pictures-and-press-releases/le-chatelier-henry-louis) Complete Dictionary of Scientific Biography, on Encyclopedia.com

## Other sections

- [Summary](https://www.materialinsights.org/technologies/portland_cement/index.md)
- [Overview](https://www.materialinsights.org/technologies/portland_cement/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/portland_cement/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/portland_cement/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/portland_cement/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/portland_cement/tech-industries/index.md)
