# Potter's wheel: Overview

Source page: https://www.materialinsights.org/technologies/potters_wheel/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

The potter's wheel spins a lump or coil of clay so the potter's hands can shape it into a round, even vessel quickly. Potters in the Southern Levant first used it in the second half of the fifth millennium BC ^[1], and it reached Egypt from the Levant about 2600 BC ^[2]. Throwing whole pots from a lump came much later ^[1]. Electric wheels are now standard in studios and schools.

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

A heavy disc turns on a pivot. On the first wheels, potters built a pot from coils of clay and then turned the wheel at around 80 revolutions per minute to smooth and shape it ^[1]. Throwing needs more speed, about 150 revolutions per minute ^[1]. A wheel spun by hand has little momentum, so faster wheels were joined to a flywheel worked by the feet, which stores energy and keeps turning steadily ^[2]. The potter centres the clay, pushes a thumb into the middle to open it, and then squeezes the wall upwards between the hands. Because the clay turns under still hands, every part of the wall gets the same treatment, so the pot comes out round.

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Source |
|---|---|---|---|
| Wheel speed needed for wheel-coiling, about | 80 | rpm | ^[1] |
| Wheel speed needed for wheel-throwing | 150 | rpm | ^[1] |
| Time between wheel-coiling and wheel-throwing, more than | 3000 | years | ^[1] |
| Date of one of the earliest wheels found, Tel Halif, Israel, about | -4000 | year (negative = BCE) | ^[2] |

as of 2026-11-11. The speeds are Roux's figures for the two techniques [1]; the Tel Halif find is dated to the Chalcolithic period [2].

#### Where it is used

The main places and products the technology is found in

- Studio and craft pottery
- Teaching in schools, colleges and community workshops
- Traditional village potteries in many countries
- Trimming and finishing in some ceramics factories

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Installed**
: No count found

**Unit**
: wheels

**Note**
: No source opened gives the number of wheels in use; most wheels today are driven by electric motors.

as of 2026-11-11

#### Sources

1. [Technological innovations and developmental trajectories: social factors as evolutionary forces](https://tripod-journal.bezalel.ac.il/en/technological-inventions-and-innovations-cognitive-and-social-factors-as-evolutionary-forces/) Valentine Roux, chapter in Innovation in Cultural Systems (MIT Press), on Tripod (Bezalel Academy of Arts and Design), 2010
2. [The Origins and Use of the Potter's Wheel in Ancient Egypt](https://orca.cardiff.ac.uk/45612/1/2013dohertyskphd.pdf) Sarah K. Doherty, PhD thesis, Cardiff University, 2012

## Other sections

- [Summary](https://www.materialinsights.org/technologies/potters_wheel/index.md)
- [Science](https://www.materialinsights.org/technologies/potters_wheel/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/potters_wheel/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/potters_wheel/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/potters_wheel/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/potters_wheel/tech-industries/index.md)
