# Screw-cutting lathe: Overview

Source page: https://www.materialinsights.org/technologies/precision_screw_lathe/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

A screw-cutting lathe cuts accurate, identical screw threads on a turning bar. Before it, threads were cut crudely by hand ^[1]. Jesse Ramsden built such lathes in the 1770s for the screws of his dividing engines ^[3], and Henry Maudslay's hand-driven lathe of about 1800 began the making of accurate threads for engineering ^[1]. The same principle cuts threads on lathes today.

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

The work turns in the lathe's spindle. A long lead screw runs beside it and moves the slide rest that carries the cutting tool ^[1]. The lead screw is linked to the spindle by change wheels, a set of gears ^[1]. For every turn of the work, the tool moves along by a fixed distance, so it cuts a helix with an exact, even pitch. Changing the gear ratio changes the pitch. Ramsden even used the gears to cancel errors: his lead screw was 1% out, and change wheels of 198 and 200 teeth corrected it ^[3]. The hard part is the first accurate lead screw, since every later screw copies it ^[2].

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Pitch error of Ramsden's lead screw, corrected by change wheels | 1 | % | – | ^[3] |
| Error of Ramsden's dividing engine, under | 0.5 | arc second | 1775 | ^[4] |
| Thread flank angle proposed by Whitworth | 55 | degrees | 1841 | ^[5] |
| Thread angle proposed by Sellers | 60 | degrees | 1864 | ^[5] |

as of 2026-11-11. The dividing-engine error is the Dictionary of Scientific Biography's figure [4]; Grace's Guide gives a claimed error of under one second for Ramsden's engine of 1774 [6]. The thread angles are the years they were proposed [5].

#### Where it is used

The main places and products the technology is found in

- Lead screws that move the tools of other machine tools
- Fasteners: bolts, nuts and screws
- Measuring instruments such as dividing engines and micrometers
- Engine, pump and pipe threads

as of 2026-11-11

#### Scale today

How much of it there is now: units in use, made each year and who uses it

**Installed**
: No count found

**Unit**
: lathes able to cut threads

**Note**
: No source opened counts screw-cutting lathes; thread cutting is now a standard function of most lathes.

as of 2026-11-11

#### Sources

1. [Henry Maudslay's original screw-cutting lathe, c.1800](https://collection.sciencemuseumgroup.org.uk/objects/co46284/) Science Museum Group Collection
2. [Machine-Screw thread making tool, by Henry Maudslay](https://collection.sciencemuseumgroup.org.uk/objects/co46546/machine-screw-thread-making-tool-by-henry-maudslay) Science Museum Group Collection
3. [Jesse Ramsden](https://gracesguide.co.uk/Jesse_Ramsden) Grace's Guide to British Industrial History
4. [Ramsden, Jesse (Dictionary of Scientific Biography entry)](https://mathshistory.st-andrews.ac.uk/DSB/Ramsden.pdf) Roderick S. Webster, Dictionary of Scientific Biography (MacTutor, University of St Andrews copy)
5. [Historical Background to Screw Threads](https://www.boltscience.com/pages/screw2.htm) Bolt Science

## Other sections

- [Summary](https://www.materialinsights.org/technologies/precision_screw_lathe/index.md)
- [Science](https://www.materialinsights.org/technologies/precision_screw_lathe/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/precision_screw_lathe/tech-evolution/index.md)
- [Materials](https://www.materialinsights.org/technologies/precision_screw_lathe/tech-materials/index.md)
- [Energy footprint](https://www.materialinsights.org/technologies/precision_screw_lathe/tech-energy-footprint/index.md)
- [Industries](https://www.materialinsights.org/technologies/precision_screw_lathe/tech-industries/index.md)
