# Statistical quality control

Control charts tell normal variation from real problems, so quality is built in.

Source page: https://www.materialinsights.org/technologies/statistical_process_control/

Making things · Production systems · No. 495

- Electrical and chemical age
- Readiness 9 of 9
- Process
 Making things · Technology

A memo about a page long, written in 1924, taught factories to stop chasing every wobble and act only on real faults.

Chart: Illustration: Statistical quality control

##### Where it comes from

Chart: Map of where it comes from

Walter Shewhart, a physicist at Western Electric, proposed the control chart in a memo of May 1924 while studying inspection data for the Bell telephone system. His book of 1931 set out the method in full.

##### Three things to know

1. Shewhart's chart sampled parts during production instead of waiting for the end of the run.
2. With limits at three standard deviations, a process working normally gives a false alarm only 0.27% of the time.
3. During the Second World War the American Standards Association issued war standards for control charts in 1941 and 1942.

##### The journey

1. 1 **Sample**Measure a few parts at regular times during production
2. 2 **Plot**Mark the sample averages or ranges on a chart
3. 3 **Limits**Draw lines three standard deviations either side of the centre
4. 4 **Signal**A point outside the lines points to a real cause
5. 5 **Act**Find and remove the cause, then keep watching
 Covered in [What engineers do: rules of thumb, the method and the kinds of engineering knowledgeEngineering](https://www.materialinsights.org/learn/engineering/what-engineers-do/)[Control and systems: feedback, stability and how machines are made to behaveEngineering](https://www.materialinsights.org/learn/engineering/control-and-systems/)[Design, failure and safety: how engineering knowledge growsEngineering](https://www.materialinsights.org/learn/engineering/design-failure-safety/)

##### Go deeper pick a tab to open it in full

## Other sections

- [Overview](https://www.materialinsights.org/technologies/statistical_process_control/tech-overview/index.md)
- [Science](https://www.materialinsights.org/technologies/statistical_process_control/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/statistical_process_control/tech-evolution/index.md)
- [Industries](https://www.materialinsights.org/technologies/statistical_process_control/tech-industries/index.md)
