# Statistical quality control: Overview

Source page: https://www.materialinsights.org/technologies/statistical_process_control/tech-overview/

#### What it does

The job the technology does for people, in a short paragraph

Statistical quality control tells a process that is drifting from one that is only showing its normal scatter. Workers sample parts as they are made and plot the results on a control chart, so they fix real faults and leave a stable process alone. Walter Shewhart proposed the chart in 1924 ^[1], and by 1937 a dozen or more mass-production industries used the methods routinely ^[2].

as of 2026-11-11

#### How it works

The working principle in plain words, step by step

Every process varies a little, even when nothing is wrong. Shewhart's idea was to measure how big that normal scatter is and to treat only larger swings as a sign of trouble. At set times a few parts are measured and their average, or range, is plotted on a chart ^[2]. A centre line marks the usual value. Control limits are drawn above and below it, usually at three standard deviations, a measure of the normal scatter ^[3]. If the process is stable, a point falls outside these 3-sigma limits only about 0.27% of the time ^[3]. So a point beyond them, or a run of points drifting one way, is worth a search for a cause such as a worn tool or a new batch of material.

as of 2026-11-11

#### Key figures

The handful of numbers that size it up, each with its unit, year and source

| Figure | Value | Unit | Year | Source |
|---|---|---|---|---|
| Usual width of control limits | 3 | standard deviations either side of the centre line | – | ^[3] |
| Chance that a stable, normally distributed process falls outside 3-sigma limits | 0.003 | probability | – | ^[3] |
| Mass-production industries using the methods in normal operation | 12 | industries (a dozen or more) | 1937 | ^[2] |
| Local quality control societies that formed the American Society for Quality Control | 17 | societies | 1946 | ^[2] |

as of 2026-11-11. The 3-sigma figures are standard statistics; the NIST handbook page shows no year of any kind, so they carry none [3]. The 1937 and 1946 rows are the years the events happened [2].

#### Where it is used

The main places and products the technology is found in

- Inspection of parts on factory production lines
- Monitoring chemical and process plants
- Telephone and electronics manufacturing, where the method began
- Wartime factory production under the American war standards for control charts ^[2]
- Hospitals and health care improvement teams ^[6]
- Quality software that charts data from machines and laboratories

as of 2026-11-11

#### Sources

1. [Walter A. Shewhart: Father of statistical quality control](https://asq.org/about-asq/honorary-members/shewhart) American Society for Quality (ASQ), honorary members pages
2. [Chapter 1 Introduction Historical Background | An Introduction to Acceptance Sampling and SPC with R](https://bookdown.org/lawson/an_introduction_to_acceptance_sampling_and_spc_with_r26/introduction-historical-background.html) John Lawson, bookdown.org
3. [6.3.1. What are Control Charts?](https://itl.nist.gov/div898/handbook/pmc/section3/pmc31.htm) NIST/SEMATECH e-Handbook of Statistical Methods, US National Institute of Standards and Technology
4. [100th Anniversary of the Shewhart Chart: Why Do We Care?](https://www.ihi.org/insights/100th-anniversary-shewhart-chart-why-do-we-care) Rebecca Steinfield and Robert Lloyd, Institute for Healthcare Improvement (IHI), 2024

## Other sections

- [Summary](https://www.materialinsights.org/technologies/statistical_process_control/index.md)
- [Science](https://www.materialinsights.org/technologies/statistical_process_control/tech-science/index.md)
- [Evolution](https://www.materialinsights.org/technologies/statistical_process_control/tech-evolution/index.md)
- [Industries](https://www.materialinsights.org/technologies/statistical_process_control/tech-industries/index.md)
