# Statistical quality control: Science

Source page: https://www.materialinsights.org/technologies/statistical_process_control/tech-science/

#### Principles

The science it rests on, with why each principle matters to it
 Relies on

- [Probability and statistics](https://www.materialinsights.org/science/probability_theory/) Control limits come from the normal distribution: tables of it give the 0.0027 chance that a stable process falls outside 3-sigma limits ^[3].

as of 2026-11-11

#### Discoveries

The discoveries that made it possible: when, by whom and what was found

| Year | Who | What |
|---|---|---|
| 1778 | Pierre-Simon Laplace | Found the distribution later called normal, the bell curve of errors ^[4] |
| 1809 | Carl Friedrich Gauss (and Robert Adrain, 1808) | Developed the formula for the normal distribution ^[4] |
| 1924 | Walter Shewhart | Proposed judging a process by samples taken during production, against limits set by its normal scatter ^[1, 2] |

as of 2026-11-11

#### The science explained

The science behind it explained for a curious reader

Think of throwing darts at a board while trying to hit the same spot. Even a steady hand scatters the darts a little, and most land near the middle. That scatter follows the bell-shaped normal curve worked out by Laplace and Gauss ^[4]. A control chart draws a ring around the middle wide enough to hold nearly all darts from a steady hand: three standard deviations each way ^[3]. A dart outside the ring is so unlikely by chance, about 3 in 1,000 ^[3], that something has probably changed, such as a draught or a bent flight. Shewhart's insight was to apply this to machines: leave the normal scatter alone, and hunt only for the causes behind the rare darts outside the ring.

as of 2026-11-11

#### Sources

1. [Walter A. Shewhart: Father of statistical quality control](https://asq.org/about-asq/honorary-members/shewhart) American Society for Quality (ASQ), honorary members pages
2. [Chapter 1 Introduction Historical Background | An Introduction to Acceptance Sampling and SPC with R](https://bookdown.org/lawson/an_introduction_to_acceptance_sampling_and_spc_with_r26/introduction-historical-background.html) John Lawson, bookdown.org
3. [6.3.1. What are Control Charts?](https://itl.nist.gov/div898/handbook/pmc/section3/pmc31.htm) NIST/SEMATECH e-Handbook of Statistical Methods, US National Institute of Standards and Technology
4. [History of the Normal Distribution](https://onlinestatbook.com/2/normal_distribution/history_normal.html) David M. Lane, Online Statistics Education

## Other sections

- [Summary](https://www.materialinsights.org/technologies/statistical_process_control/index.md)
- [Overview](https://www.materialinsights.org/technologies/statistical_process_control/tech-overview/index.md)
- [Evolution](https://www.materialinsights.org/technologies/statistical_process_control/tech-evolution/index.md)
- [Industries](https://www.materialinsights.org/technologies/statistical_process_control/tech-industries/index.md)
